Manualshelf

Product Manual

ManualsBrandsCoolSpace ManualsEvaporative CoolersCool-Space Variable Speed Direct Drive Evaporative Cooler — 1,200 CFM Cools 600 Sq. Ft.
12345678910
Page 2
2.0 UNPACKING YOUR FLURRY
IMPORTANT
Carefully examine the carton for damage before opening. If the carton is
damaged notify the shipping company immediately.
• Find the package of (4) casters
and remove
• Lay box on its side and carefully
open the bottom of the box - DO
NOT STAND UPSIDE DOWN
• Install (4) casters
• Stand unit up on casters and
remove box
3.0 SETUP OF THE COOLSPACE UNIT
The COOL-SPACE FLURRY has been factory tested and is ready to use. The
unit should be placed on a level surface, and the casters locked to prevent
inadvertent movement. Follow instructions below to connect water and
electrical supply.
3.1 CONNECTING THE WATER SUPPLY
!
CAUTION
Do not connect to any water source where water pressure exceeds 120
psi. This will cause permanent damage to the unit.
The FLURRY comes equipped with a
female water source connection. Use a
standard garden hose (not provided) to
connect the water supply to the cooler.