User's Manual

CoolR Group
USER MANUAL 4
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a
minimum separation distance of 10mm must be maintained between the user’s body and the handset,
including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not
contain any metallic components.
Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements
and should be avoided. Use only the supplied or an approved antenna.
A. Overview
The iOT Global Hub is a device designed to track assets based on WiFi + Cell ID + GPS technology. It is also the
perfect platform for collecting and managing data from wireless and wired sensors through its Bluetooth
4.0 (le) feature. Its connectivity features enable the device to roam globally using 2bands UMTS and 2 bands
2G as fallback technology. It has a dedicated power management chipset and it is optimized to work as a
battery powered device with a 1500 mAh capacity.
B. Specification
1.1 Technical Specification
1. Power Capacity : 1500 mAh Lithium Polymer
2. Battery Cell : Lithium Polymer
3. Accelerometer : 3 Axis
4. Rated Input : DC 5V 500mA
5. Dimensions : 4.9 x 2.9 x 0.39 inch
6. Weight : ~40 grams/ ~1.4 oz
1.2 Operational Specifications
All transmitter characteristics are listed in this section. Typical specifications are for mid-band channel
frequency and under typical operating conditions. Min/Max specifications are for extreme operating voltage
and temperature conditions.
1. TXO : BAND Supported
2. 4G : (B2/4/5/12/17 , FDD-LTE)
3. 3G : 2,4,5 (WCDMA)
4. 2G : 2,3,5,8 (GSM)