No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.
Feature Highlights of the COOLPIX L320 Let your camera take over G (Easy Auto) Mode................................................. A 34 When you aim the camera at your subject, the camera selects the appropriate settings for you. It’s easy to take pictures in situations that normally require difficult settings, such as when shooting with backlighting or shooting at night. Simply press the shutter-release button to capture beautiful shots quickly and easily.
Introduction Parts of the Camera The Basics of Shooting and Playback Shooting Features Playback Features Recording and Playing Back Movies General Camera Setup Reference Section Technical Notes and Index i
Introduction Read This First Introduction Thank you for purchasing the Nikon COOLPIX L320 digital camera. Before using the camera, please read the information in “For Your Safety” (A ix) and familiarize yourself with the information provided in this manual. After reading, please keep this manual handy and refer to it to enhance your enjoyment of your new camera.
About This Manual If you want to start using the camera right away, see “The Basics of Shooting and Playback” (A 11). To learn about the parts of the camera and information that is displayed in the monitor, see “Parts of the Camera” (A 1).
Other Information • Symbols and Conventions To make it easier to find the information you need, the following symbols and conventions are used in this manual: Icon Description Introduction B This icon indicates cautions and information that should be read before using the camera. C This icon indicates notes and information that should be read before using the camera. A/E/F These icons indicate other pages containing relevant information; E: “Reference Section”, F: “Technical Notes and Index.
Information and Precautions Life-Long Learning Introduction As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually updated information is available online at the following sites: • For users in the U.S.A.: http://www.nikonusa.com/ • For users in Europe and Africa: http://www.europe-nikon.com/support/ • For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.
Before Taking Important Pictures Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.
Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that was digitally copied or reproduced by means of a scanner, digital camera or other device may be punishable by law. • Items prohibited by law from being copied or reproduced Introduction Do not copy or reproduce paper money, coins, securities, government bonds or local government bonds, even if such copies or reproductions are stamped “Sample.
Disposing of Data Storage Devices Introduction viii Please note that deleting images or formatting data storage devices such as memory cards or built-in camera memory does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s responsibility.
For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them. WARNINGS Turn off in the event of malfunction Should you notice smoke or an unusual smell coming from the camera or AC adapter, unplug the AC adapter and remove the batteries immediately, taking care to avoid burns.
Keep out of reach of children Particular care should be taken to prevent infants from putting the batteries or other small parts into their mouths. Introduction Do not remain in contact with the camera, battery charger, or AC adapter for extended periods while the devices are on or in use Parts of the devices become hot. Leaving the devices in direct contact with the skin for extended periods may result in low-temperature burns.
Observe the following precautions when handling the Battery Chargers (available separately) • Keep dry. Failure to observe this precaution could result in fire or electric shock. • Dust on or near the metal parts of the plug should be removed with a dry cloth. Continued use could result in fire. • Do not handle the power cable or go near the battery charger during lightning storms. Failure to observe this precaution could result in electric shock.
Use appropriate cables When connecting cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose, to maintain compliance with product regulations. Introduction Handle moving parts with care Be careful that your fingers or other objects are not pinched by the lens cover or other moving parts. CD-ROMs The CD-ROMs included with this device should not be played back on audio CD equipment.
Notices Notice for Customers in the U.S.A. Introduction Federal Communications Commission (FCC) Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Interface Cables Use the interface cables sold or provided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules. Introduction xiv Notice for customers in the State of California WARNING Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Nikon Inc.
Symbol for Separate Collection in European Countries Introduction This symbol indicates that this product is to be collected separately. The following apply only to users in European countries: • This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste. • For more information, contact the retailer or the local authorities in charge of waste management.
Table of Contents Introduction ................................................... ii Introduction Read This First ....................................................... ii About This Manual .................................................. iii Information and Precautions............................. v For Your Safety .................................................... ix WARNINGS ................................................................... ix Notices.............................................
Focusing............................................................... 59 Using Face Detection .......................................... 59 Focus Lock.................................................................. 60 Playback Features....................................... 63 Recording and Playing Back Movies.... 75 Recording Movies ............................................. 76 Features That Can Be Set by Pressing the d Button (Movie Menu)............................... 79 Playing Back Movies ....
Introduction xviii The Playback Menu ................................... E34 a Print Order (Creating a DPOF Print Order)............... E34 b Slide Show ................................................. E37 d Protect......................................................... E38 f Rotate Image ............................................ E40 h Copy (Copy Between Internal Memory and Memory Card) ....................................... E41 The Movie Menu ........................................
Parts of the Camera The Camera Body....................................................2 Attaching the Camera Strap and Lens Cap..........................................4 Raising and Lowering the Flash ...............................................................5 Parts of the Camera This chapter describes the parts of the camera and explains information that is displayed in the monitor. Using Menus (d Button).....................................6 The Monitor...........................................
The Camera Body 1 23 4 5 6 7 3 8 Parts of the Camera 9 10 12 1 2 Zoom control........................................................ 25 f : Wide-angle .............................................. 25 g : Telephoto................................................. 25 h : Thumbnail playback .......................... 65 i : Playback zoom...................................... 64 j : Help.............................................................. 36 2 Shutter-release button......................
2 3 4 1 11 10 12 13 14 8 k (apply selection) button 9 Battery-chamber/ memory card slot cover..........................12, 14 1 Monitor ........................................................................ 8 2 Built-in microphone.......................................... 76 3 Flash lamp............................................................... 48 4 b (e movie-record) button..................... 76 5 A (shooting mode) button ..........................................................
Attaching the Camera Strap and Lens Cap Attach the Lens Cap LC-CP25 to the camera strap, and then attach the strap to the camera. Parts of the Camera Attach them at two places. B 4 Lens Cap • Remove the lens cap before you take a picture. • At times when you are not taking pictures such as when the power is off or while you are carrying the camera, attach the lens cap to the camera to protect the lens.
Raising and Lowering the Flash Press the m (flash pop-up) button to raise the flash. • Using the Flash (Flash Modes) ➝ A 46 • Push the flash down gently to lower the flash until it clicks into place when not in use.
Using Menus (d Button) You can use the multi selector and the k button to navigate the menus. 1 Press the d button. 2 • The menu is displayed. Press the multi selector J. • The current tab is displayed in yellow. Shooting menu Tab Parts of the Camera 3 Press H or I to select another tab. Set up Welcome screen Time zone and date Monitor settings Print date Vibration reduc tion Motion detec tion AF assist 6 4 Image mode White balance Continuous ISO sensitivity Color options Press the k button.
5 Press H or I to select an item in the menu. 6 • The settings for the item you selected are displayed. Vibration reduction Set up Welcome screen Time zone and date Monitor settings Print date Vibration reduc tion Motion detec tion AF assist Press H or I to select a setting. On Off 8 Press the k button. • The setting you selected is applied. • When you are finished using the menu, press the d button. Parts of the Camera 7 Press the k button.
The Monitor • The information that is displayed in the monitor during shooting and playback changes depending on the camera’s settings and state of use. By default, information is displayed when you turn on the camera and also when you operate the camera, and disappears after a few seconds (Monitor settings (A 84) > Photo info > Auto info). Shooting Mode Parts of the Camera 33 32 31 4 2 1 5 6 7 3 8 10 9 30 10 29 28 27 15 26 25 24 29m 0s +1.0 1600 23 22 8 10 13 14 11 12 16 17 1/250 F 3.
1 Shooting mode.............................34, 35, 41, 44 2 Macro mode .......................................................... 51 Number of exposures remaining (still images)........................................... 20, E25 3 Zoom indicator ............................................ 25, 51 19 Internal memory indicator ............................20 4 Focus indicator..................................................... 26 20 Aperture value ...................................................
Playback Mode 1 16 2 3 15/05/2013 12:00 9999. JPG 4 5 15 14 13 Parts of the Camera 10 6 12 999/ 999 11 10 999/ 999 9999/9999 a 7 8 1m 0s 1m 0s 9 b 1 Date of recording ............................................... 16 10 Internal memory indicator ............................28 2 Time of recording............................................... 16 11 Movie playback indicator...............................80 3 Battery level indicator......................................
The Basics of Shooting and Playback Preparation Shooting Step 1 Turn the Camera On..............................................................................................20 Step 2 Select a Shooting Mode.......................................................................................22 Step 3 Frame a Picture .......................................................................................................24 Step 4 Focus and Shoot..............................................................
Preparation 1 Insert the Batteries 1 Open the battery-chamber/memory card slot cover. • Before opening the battery-chamber/memory card slot cover, hold the camera upside down to prevent the batteries from falling out. 2 3 1 2 Insert the batteries. • Confirm that the positive (+) and negative (–) terminals are oriented correctly as described on the labels at the entrance of the battery chamber, and insert the batteries.
B Removing the Batteries B Notes About the Batteries • Turn the camera off and be sure that the power-on lamp and the monitor have turned off before opening the battery-chamber/memory card slot cover. • The camera, batteries, or memory card may be hot immediately after using the camera. Observe caution when removing the batteries or memory card. • Be sure to read and follow the warnings for the battery on page x and in “Batteries” (F4) before use.
Preparation 2 Insert a Memory Card 1 Turn off the camera and open the batterychamber/memory card slot cover. • When the camera turns off, the monitor turns off. • Before opening the battery-chamber/memory card slot cover, hold the camera upside down to prevent the batteries from falling out. 2 3 1 2 Insert a memory card. • Slide the memory card in until it clicks into place.
B Formatting a Memory Card • The first time you insert a memory card that has been used in another device into this camera, be sure to format it with this camera. • All data stored on a memory card is permanently deleted when the card is formatted. Copy any data on the card that you wish to keep to a computer before formatting. • To format a memory card, insert the card into the camera, press the d button, and select Format card (E58) in the setup menu (A 84).
Preparation 3 Set the Display Language, Date, and Time When the camera is turned on for the first time, the language-selection screen and the date and time setting screen for the camera clock are displayed. 1 Press the power switch to turn on the camera. • When the camera is turned on, the power-on lamp (green) lights and then the monitor turns on (the power-on lamp turns off when the monitor turns on).
4 Press J or K to select your home time zone and then press the k button. • Press H to enable daylight saving time. When the daylight saving time function is enabled, W is displayed at the top of the monitor. Press I to disable the daylight saving time function. 5 Press H or I to select the date format and then press the k button. Date format Press H, I, J, or K to set the date and time, and then press the k button.
8 Make sure that the lens cap has been removed, then press the A button. • The lens extends and the shooting-mode selection screen is displayed. 9 The Basics of Shooting and Playback 18 When Easy auto mode is displayed, press the k button. • The camera enters the shooting mode and you can take pictures in Easy auto mode (A 22). • To switch to another shooting mode, press the multi selector H or I before pressing the k button. Press this button in shooting mode for shooting-mode selection menu.
C Changing the Language Setting and the Date and Time Setting • You can change these settings using the Language (E59) and Time zone and date (E47) settings in the z setup menu (A 84). • You can enable and disable daylight saving time by selecting the z setup menu > Time zone and date (E47) > Time zone. When enabled, the clock moves forward one hour; when disabled, the clock moves back one hour.
Step 1 Turn the Camera On 1 Remove the lens cap and press the power switch to turn on the camera. • The lens extends and the monitor turns on. • Raise the flash when using it (A 5). 2 Battery level indicator The Basics of Shooting and Playback Battery Level Indicator Display Description b Battery level high. B Battery level low. Prepare to replace the batteries. Battery exhausted. Cannot take pictures. Replace the batteries.
Turning the Camera On and Off • Remove the lens cap and turn the camera on. • When the camera is turned on, the power-on lamp (green) lights and then the monitor turns on (the power-on lamp turns off when the monitor turns on). • To turn off the camera, press the power switch. When the camera turns off, the power-on lamp and the monitor turn off. • You can press and hold the c (playback) button to turn on the camera and switch to playback mode. The lens does not extend.
Step 2 Select a Shooting Mode 1 Press the A button. • The shooting-mode selection menu, which allows you to select the desired shooting mode, is displayed. 2 The Basics of Shooting and Playback 22 Press the multi selector H or I to select the desired shooting mode and then press the k button. • G (easy auto) mode is used in this example. • The shooting mode setting is saved when the camera is turned off.
Available Shooting Modes The camera automatically selects the optimum scene mode when you frame a picture. b Scene (A 35) Camera settings are optimized according to the scene that you select. • To select a scene, first display the shooting-mode selection menu and then press the multi selector K. Select the desired scene by pressing H, I, J, or K, and then press the k button.
Step 3 Frame a Picture 1 Hold the camera steady. • Keep fingers, hair, the camera strap, and other objects away from the lens, flash, AF-assist illuminator, and microphone. The Basics of Shooting and Playback 2 Frame the picture. Shooting mode icon • Aim the camera at the desired subject. • When the camera automatically determines the scene mode, the shooting mode icon changes (A 34).
B Easy Auto Mode • Depending upon shooting conditions, the camera may not select the desired scene mode. In this case, select another shooting mode (A 35, 41, and 44). • When the digital zoom is in effect, the scene mode changes to U.
Step 4 Focus and Shoot 1 Press the shutter-release button halfway (A 27). • When a face is detected: The camera focuses on the face framed by the yellow double border (focus area). When the subject is in focus, the double border turns green. The Basics of Shooting and Playback F 3.1 1/250 F 3.1 • When you are using digital zoom, the camera focuses on the subject in the center of the frame and the focus area is not displayed. When the camera has focused, the focus indicator (A 8) lights in green.
The Shutter-release Button Press halfway To set focus and exposure (shutter speed and aperture value), press the shutter-release button halfway, stopping when you feel resistance. Focus and exposure remain locked while the shutterrelease button is pressed halfway. Press all the way While pressing the shutter-release button halfway, press the shutter-release button the rest of the way down to release the shutter and take a picture.
Step 5 Play Back Images 1 Press the c (playback) button. • The camera switches to playback mode and the last image saved is displayed in full-frame playback mode. c (playback) button 2 Use the multi selector to select an image to display. Displays the previous image The Basics of Shooting and Playback • Display the previous image: H or J • Display the next image: I or K • Press and hold H, I, J, or K to scroll quickly through images.
C Viewing Images • Images may be displayed briefly at low resolution immediately after switching to the previous image or next image. • When you play back images in which the face of a person (A 59) or pet (A 40) was detected at the time of shooting, depending on the orientation of the detected face, the images are automatically rotated for playback display.
Step 6 Delete Images The Basics of Shooting and Playback 30 1 Press the l button to delete the image currently displayed in the monitor. 2 Press the multi selector H or I to select the desired deletion method and then press the k button. • Current image: Only the current image is deleted. • Erase selected images: Multiple images can be selected and deleted (A 31). • All images: All images are deleted. • To exit without deleting, press the d button.
Operating the Erase Selected Images Screen 1 Press the multi selector J or K to select an image to be deleted, and then press H to add a check mark. Erase selec ted images • To undo the selection, press I to remove the check mark. • Rotate the zoom control (A 2) to g (i) to switch to fullframe playback mode or f (h) to display thumbnails. 2 Back ON/OFF Add check marks to all images that you want to delete and then press the k button to confirm the selection. • A confirmation dialog is displayed.
32
Shooting Features This chapter describes the camera’s shooting modes and the features that are available when using each shooting mode. You can adjust settings according to the shooting conditions and the kind of pictures you want to take. Shooting Features G (Easy Auto) Mode............................................ 34 Scene Mode (Shooting Suited to Scenes) .......... 35 Smart Portrait Mode (Capturing Smiling Faces) ... 41 A (Auto) Mode ....................................................
G (Easy Auto) Mode The camera automatically selects the optimum scene mode when you frame a picture.
Scene Mode (Shooting Suited to Scenes) When one of the following scenes is selected, camera settings are automatically optimized for the selected scene. Enter shooting mode M A (shooting mode) button M b (second icon from the top*) M K M H, I, J, K M select a scene M k button * The icon of the last scene selected is displayed.
To View a Description of Each Scene Select the desired scene from the scene selection screen and rotate the zoom control (A 2) to g (j) to view a description of that scene. To return to the original screen, rotate the zoom control to g (j) again. Panorama assist Characteristics of Each Scene b Portrait • • • • When the camera detects a person’s face, it focuses on that face (A 59). The skin softening feature makes the skin tones in people’s faces appear smoother (A 43).
e Night portrait • • • • • O The flash always fires. Raise the flash before shooting. When the camera detects a person’s face, it focuses on that face (A 59). The skin softening feature makes the skin tones in people’s faces appear smoother (A 43). If no faces are detected, the camera focuses on the subject in the center of the frame. Digital zoom cannot be used. f Party/indoor • The camera focuses on the area in the center of the frame.
j Night landscape O • The focus area or focus indicator (A 9) always turns green when the shutter-release button is pressed halfway. k Close-up • Macro mode (A 51) is enabled and the camera automatically zooms to the closest position at which it can shoot. • The camera focuses on the area in the center of the frame. Use focus lock to frame the picture on an object not in the center of the frame (A 60). • The camera focuses even when the shutter-release button is not pressed halfway.
m Fireworks show O • Shutter speed is fixed at four seconds. • The camera focuses at infinity. • When the shutter-release button is pressed halfway, the focus indicator (A 9) always turns green. n Black and white copy • The camera focuses on the area in the center of the frame. • Use together with macro mode (A 51) when shooting subjects that are close to the camera. o Backlighting • The flash always fires. Raise the flash before shooting. • The camera focuses on the area in the center of the frame.
O Pet portrait • When you aim the camera at the face of a dog or cat, the camera can detect the face and focus on it. By default, the camera automatically releases the shutter once it has focused (pet portrait auto release). • After you select O Pet portrait, select Single or Continuous on the next screen. - Single: Images are captured one at a time. - Continuous: When the camera has focused on the detected face, it captures three images continuously at a rate of about 1.2 fps.
Smart Portrait Mode (Capturing Smiling Faces) When the camera detects a smiling face, you can take a picture automatically without pressing the shutter-release button (smile timer). You can use the skin softening option to smooth the skin tones in people’s faces. Enter shooting mode M A (shooting mode) button M F Smart portrait mode M k button 1 Frame the picture. • Raise the flash when using it (A 5). • Point the camera at a person’s face.
B Notes About Smart Portrait Mode • Digital zoom cannot be used. • Under some shooting conditions, the camera may be unable to detect faces or detect smiles. • “Notes About Face Detection” ➝ A 59 C Auto Off When Using Smile Timer When Smile timer is set to On, the auto off function (A 84) is activated and the camera turns off when either of the situations indicated below persists and no other operations are performed. • The camera does not detect any faces.
Using Skin Softening When the shutter is released in one of the following shooting modes, the camera detects one or more person’s faces (up to three), and processes the image to soften facial skin tones. • Portrait or Night portrait in G (easy auto) mode (A 34) • Portrait (A 36) or Night portrait (A 37) in scene mode • Smart portrait mode (A 41) Skin softening can also be applied to saved images (A 66, E8).
A (Auto) Mode Used for general shooting. Settings can be adjusted in the shooting menu (A 56) to suit the shooting conditions and the type of picture you want to take. Enter shooting mode M A (shooting mode) button M A (auto) mode M k button • The camera focuses on the area in the center of the frame.
Features That Can Be Set Using the Multi Selector When shooting, the multi selector H, I, J, or K can be used to set the following features.
Using the Flash (Flash Modes) In dark locations or when the subject is backlit, you can take pictures with the flash by raising the flash. You can set the flash mode. 1 Press the m (flash pop-up) button. • The flash pops up. • When the flash is lowered, flash mode is fixed at W (off). Shooting Features 2 Press the multi selector H (m flash mode). 3 Press H or I to select the desired mode and then press the k button.
Available Flash Modes U Auto The flash fires automatically when lighting is dim. V Auto with red-eye reduction Reduces red-eye in portraits caused by the flash (A 48). W Off The flash does not fire. • We recommend using a tripod to stabilize the camera when shooting in dark surroundings. X Fill flash The flash fires whenever a picture is taken. Use to “fill-in” (illuminate) shadows and backlit subjects. Y Slow sync Shooting Features Auto flash mode is combined with slow shutter speed.
B Lowering the Flash Push the flash down gently to lower the flash until it clicks into place when not in use (A 5). C The Flash Lamp The flash lamp indicates the status of the flash when you press the shutter-release button halfway. • On: The flash fires when a picture is taken. • Flashing: The flash is charging. The camera cannot take pictures. • Off: The flash does not fire when a picture is taken. If the battery level is low, the monitor turns off while the flash is charging.
Using the Self-timer The camera’s self-timer can release the shutter about 10 seconds after you press the shutterrelease button. The self-timer is useful when you want to be in the picture you are taking, or when you want to avoid the effects of camera shake that occur when you press the shutter-release button. When using the self-timer, use of a tripod is recommended. Set Vibration reduction to Off in the setup menu (A 84) when shooting using a tripod to stabilize the camera.
4 Press the shutter-release button the rest of the way down. • The self-timer starts, and the number of seconds remaining before the shutter is released is displayed in the monitor. The self-timer lamp flashes while the timer is counting down. About one second before the shutter is released, the lamp stops flashing and glows steadily. • When the shutter is released, the self-timer is set to OFF. • To stop the timer before a picture is taken, press the shutter-release button again.
Using Macro Mode When using macro mode, the camera can focus on objects as close as about 1 cm (0.4 in.) from the lens. This feature is useful when taking close-up pictures of flowers and other small subjects. 1 Press the multi selector I (p macro mode). 2 Press H or I to select ON and then press the k button. • F is displayed. • If a setting is not applied by pressing the k button within a few seconds, the selection is canceled.
B Notes About Using the Flash The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.). C Autofocus When shooting still images in macro mode, the camera focuses continuously until the shutterrelease button is pressed halfway to lock the focus. You may hear the sound of the camera focusing. C The Macro Mode Setting • Macro mode cannot be used when using certain shooting modes.
Adjusting Brightness (Exposure Compensation) You can adjust overall image brightness. 1 Press the multi selector K (o exposure compensation). 2 Press H or I to select a compensation value. • To make the image brighter, apply positive (+) exposure compensation. • To make the image darker, apply negative (–) exposure compensation. +0.3 0.0 Exposure compensation 3 • If you do not press the k button within a few seconds, the setting is applied and the menu disappears.
Default Settings Default settings for each shooting mode are described below. Flash1 (A 46) Self-timer (A 49) Macro (A 51) Exposure compensation (A 53) G (easy auto) (A 34) U2 Off Off3 F (smart portrait) (A 41) U4 Off5 Off6 0.0 A (auto) (A 44) U Off Off 0.0 b (A 36) V Off Off6 0.0 c (A 36) W 6 Off Off6 0.0 d (A 36) W6 Off6 Off6 0.0 e (A 37) V7 Off Off6 0.0 f (A 37) V8 Off Off6 0.0 Z (A 37) U Off Off6 0.0 z (A 37) U Off Off6 0.
Flash1 (A 46) O (A 40) 1 2 3 4 5 6 7 8 9 W6 Self-timer (A 49) Y9 Macro (A 51) Off Exposure compensation (A 53) 0.0 Setting is used when the flash is raised. You can select U (auto) or W (off). When U (auto) is selected, the camera automatically selects the flash mode appropriate for the scene it has selected. The setting cannot be changed. Automatically changes to macro mode when the camera selects Close-up. Cannot be used when Blink proof is set to On. Can be set when Smile timer is set to Off.
Features That Can Be Set by Pressing the d Button (Shooting Menu) When shooting, you can set the following features by pressing the d button. Shooting menu Image mode White balance Continuous ISO sensitivity Color options 29m 0s 970 The features that are available vary with the shooting mode, as shown below.
Available Shooting Menus Option Description A E24 White balance Allows you to adjust white balance to suit the light source in order to make the colors in images match what you see with your eye. The available settings are Auto (default setting), Preset manual, Daylight, Incandescent, Fluorescent, Cloudy, and Flash. E26 Continuous Allows you to capture a series of images. The available settings are Single (default setting), Continuous, BSS, and Multi-shot 16.
Features That Cannot Be Used Simultaneously Certain features cannot be used simultaneously. Restricted function Option Description Continuous (A 57) When Continuous, BSS, or Multi-shot 16 is selected, the flash cannot be used. Blink proof (A 57) When Blink proof is set to On, the flash cannot be used. Self-timer Smile timer (A 57) When Smile timer is used for shooting, the self-timer cannot be used. Digital zoom Continuous (A 57) When Multi-shot 16 is selected, digital zoom cannot be used.
Focusing Using Face Detection In the following shooting modes, the camera uses face detection to automatically focus on people’s faces. If the camera detects more than one face, a double border is displayed around the face that the camera focuses on, and single borders are displayed around the other faces.
Focus Lock When the camera focuses on an object in the center of the frame, you can use focus lock to focus on an off-center subject. Use the following procedure when taking pictures using A (auto) mode. 1 Aim the camera at the subject so that the subject is in the center of the frame. 2 Press the shutter-release button halfway. • Confirm that the focus area turns green. • Focus and exposure are locked. Shooting Features 3 F 3.1 1/250 F 3.
B Subjects Not Suitable for Autofocus The camera may not focus as expected in the following situations. In some rare cases, the subject may not be in focus despite the fact that the focus area or the focus indicator turns green: • Subject is very dark • Objects of sharply differing brightness are included in the scene (e.g. the sun behind the subject makes that subject appear very dark) • No contrast between the subject and surroundings (e.g.
62
Playback Features This chapter describes the features that are available when playing back images. Playback menu D-Lighting 15/05/2013 15:30 0004. JPG 4/ 4 Playback Zoom .................................................... 64 Thumbnail Display, Calendar Display................ 65 Features That Can Be Set by Pressing the d Button (Playback Menu) ... 66 Connecting the Camera to a TV, Computer, or Printer ... 67 Using ViewNX 2....................................................
Playback Zoom Rotating the zoom control to g (i) in full-frame playback mode (A 28) zooms in on the center of the image displayed in the monitor. 15/05/2013 15:30 0004. JPG g (i) 4/ 4 Image is displayed full-frame. Playback Features 64 f (h) Displayed area guide Image is zoomed in. • You can change the zoom ratio by rotating the zoom control to f (h) or g (i). Images can be zoomed up to approx. 10×. • To view a different area of the image, press the multi selector H, I, J, or K.
Thumbnail Display, Calendar Display Rotating the zoom control to f (h) in full-frame playback mode (A 28) displays images in “contact sheets” of thumbnail images. f (h) 15/05/2013 15:30 0001.
Features That Can Be Set by Pressing the d Button (Playback Menu) When viewing images in full-frame playback mode or thumbnail playback mode, you can configure the menu operations listed below by pressing the d button. Option Playback Features 66 Description A I D-Lighting* Allows you to create copies with enhanced brightness and contrast, brightening dark portions of an image. E7 e Skin softening* The camera detects people’s faces in images and creates a copy with softer facial skin tones.
Connecting the Camera to a TV, Computer, or Printer You can enhance your enjoyment of images and movies by connecting the camera to a TV, computer, or printer. • Before connecting the camera to an external device, make sure the remaining battery level is sufficient and turn the camera off. For information about the connection methods and subsequent operations, refer to the documentation included with the device in addition to this document. USB/audio/video output connector How to open the connector cover.
Viewing images on a TV E14 You can view the camera’s images and movies on a TV. Connection method: Connect the video and audio plugs of the optional audio/video cable to the TV’s input jacks. Viewing and organizing images on a computer A 69 If you transfer images to a computer, you can perform simple retouching and manage image data in addition to playing back images and movies. Connection method: Connect the camera to the computer’s USB input jack with the included USB Cable UC-E16.
Using ViewNX 2 ViewNX 2 is an all-in-one software package which enables you to transfer, view, edit and share images. Install ViewNX 2 using the included ViewNX 2 CD-ROM. Your Imaging Toolbox ViewNX 2™ Installing ViewNX 2 Compatible Operating Systems Windows Windows 8, Windows 7, Windows Vista, Windows XP Playback Features • An Internet connection is required. Macintosh Mac OS X 10.6, 10.7, 10.
1 Start the computer and insert the ViewNX 2 CD-ROM into the CD-ROM drive. • Windows: If instructions for operating the CD-ROM are displayed in the window, follow the instructions to proceed to the installation window. • Mac OS: When the ViewNX 2 window is displayed, double-click the Welcome icon. 2 Select a language in the language selection dialog to open the installation window.
5 Exit the installer when the installation completion screen is displayed. • Windows: Click Yes. • Mac OS: Click OK.
Transferring Images to the Computer 1 Choose how images will be copied to the computer. Choose one of the following methods: • Direct USB connection: Turn the camera off and ensure that the memory card is inserted in the camera. Connect the camera to the computer using the included USB cable. Turn the camera on. To transfer images that are saved in the camera’s internal memory, remove the memory card from the camera before connecting it to the computer.
2 Transfer images to the computer. • Confirm that the name of the connected camera or removable disk is displayed as the “Source” on the “Options” title bar of Nikon Transfer 2 (1). • Click Start Transfer (2). 1 2 • At default settings, all the images on the memory card will be copied to the computer. 3 Terminate the connection. Playback Features • If the camera is connected to the computer, turn the camera off and disconnect the USB cable.
Viewing Images Start ViewNX 2. • Images are displayed in ViewNX 2 when transfer is complete. • Consult online help for more information on using ViewNX 2. Playback Features C 74 Starting ViewNX 2 Manually • Windows: Double-click the ViewNX 2 shortcut icon on the desktop. • Mac OS: Click the ViewNX 2 icon in the Dock.
You can record movies by simply pressing the b (e movie-record) button. 29m 0s 970 Recording and Playing Back Movies Recording and Playing Back Movies 14m30s Recording Movies ................................................ 76 Playing Back Movies............................................
Recording Movies You can record movies by simply pressing the b (e movie-record) button. 1 Display the shooting screen. Movie option • The icon for the selected movie option is displayed. The default setting is n HD 720p (1280×720) (A 79). Recording and Playing Back Movies 29m 0s 970 Maximum recording time 2 Lower the flash (A 5). • Recording movies while the flash is raised may cause the audio to be muffled. 3 Press the b (e movie-record) button to start movie recording.
B Notes About Saving Data After taking pictures or recording movies, the number of exposures remaining or the remaining recording time flashes while images or movies are being saved. Do not open the batterychamber/memory card slot cover. Image and movie data could be lost and the camera or memory card could be damaged. B Notes About Movie Recording B Recording and Playing Back Movies • Memory cards with an SD Speed Class rating of 6 or faster are recommended when recording movies (F19).
B Notes About Autofocus Autofocus may not perform as expected (A 61). Should this occur, try the following: 1. Set Autofocus mode in the movie menu to A Single AF (default setting) before starting movie recording (A 79, E45). 2. Frame another subject—positioned at the same distance from the camera as the intended subject—in the center of the frame, press the b (e movie-record) button to start recording, and then modify the composition.
Features That Can Be Set by Pressing the d Button (Movie Menu) Enter shooting mode M d button M D tab M k button The following settings can be changed. Movie Movie options Autofocus mode Wind noise reduction A Movie options E43 Autofocus mode When A Single AF (default setting) is selected, focus is locked when movie recording begins. When B Full-time AF is selected, the camera focuses continuously while recording.
Playing Back Movies Press the c button to enter playback mode. Movies are indicated by the movie options icon (A 79). Press the k button to play back movies. 15/05/2013 15:30 0010. MOV Movie options Recording and Playing Back Movies 80 10s Deleting Movies To delete a movie, select the desired movie in full-frame playback mode (A 28) or thumbnail playback mode (A 65) and then press the l button (A 30).
Functions Available During Playback Playback controls are displayed at the top of the monitor. Press the multi selector J or K to select a control. The operations described below are available. Function Icon Paused Description A Hold down the k button to rewind the movie. Advance B Hold down the k button to advance the movie. Press the k button to pause playback. The following operations can be performed while playback is paused using the controls displayed at the top in the monitor.
82
General Camera Setup This chapter describes the various settings that can be adjusted in the z setup menu. Set up 970 For further details about each setting, refer to “The Setup Menu” in the Reference Section (E46).
Features That Can Be Set by Pressing the d Button (Setup Menu) Press the d button M z (setup) tab M k button You can change the following settings by selecting the z tab when the menu is displayed. Option General Camera Setup 84 Set up Welcome screen Time zone and date Monitor settings Print date Vibration reduc tion Motion detec tion AF assist Description A Welcome screen Allows you to select whether or not a welcome screen is displayed when the camera is turned on.
Option Description A Language Allows you to change the camera’s display language. E59 Video mode Allows you to adjust TV-connection settings. E60 Blink warning Allows you to set whether or not closed eyes are detected when taking pictures of people using face detection. E60 Eye-Fi upload Allows you to set whether or not to enable the function for sending images to a computer using a commercially available Eye-Fi card.
86
E Reference Section The Reference Section provides detailed information and hints about using the camera. Shooting Using Panorama Assist ................................................................................ E2 Playback Editing Still Images ....................................................................................... E5 Editing Movies ..............................................................................................
Using Panorama Assist The camera focuses on the subject in the center of the frame. Use a tripod for the best results. Set Vibration reduction (E53) to Off in the setup menu when using a tripod to stabilize the camera. Enter shooting mode M A (shooting mode) button M b (second icon from the top*) M K M H, I, J, K M U (Panorama assist) M k button * The icon of the last scene selected is displayed. 1 Use the multi selector to select the direction and press the k button.
3 Take the next picture. • Frame the next image so that one third of the frame overlaps the first image, and press the shutter-release button. • Repeat this process until the necessary number of images has been taken to complete the scene. 4 29m 0s End 969 Press the k button when shooting is complete. • The camera returns to step 1.
C Combining Images to Make a Panorama (Panorama Maker) • You can transfer images to a computer (A 72) and use Panorama Maker to join multiple images to make a single panorama. • Install Panorama Maker from the included “ViewNX 2” CD-ROM (A 69). • For more information about using Panorama Maker, refer to the on-screen instructions and help information contained in Panorama Maker.
Editing Still Images Editing Features You can use the following features to edit your images. Edited images are saved as separate files (E67). Editing function Description D-Lighting (E7) Allows you to create a copy of the current image with enhanced brightness and contrast, brightening dark portions of the image. Skin softening (E8) Allows you to make the skin tones in people’s faces smoother. Small picture (E9) Allows you to create a small copy of images suitable for use as e-mail attachments.
B Notes About Image Editing • Images captured at an Image mode (E24) setting of g 4608×2592 cannot be edited. • This camera cannot edit images captured with another make or model of digital camera. • If no people’s faces are detected in an image, a copy cannot be created using the skin softening function (E8). • When using another make or model of digital camera, images edited with this camera may not be displayed properly and may not be able to be transferred to a computer.
I D-Lighting: Enhancing Brightness and Contrast Press the c button (playback mode) M d button M I D-Lighting M k button You can create a copy of the current image with enhanced brightness and contrast, brightening dark portions of the image. Press the multi selector H or I to select OK and then press the k button. • The original version is displayed on the left and an example of the edited version is displayed on the right. • A new, edited copy is saved as a separate image.
e Skin Softening: Softening Skin Tones Press the c button (playback mode) M d button M e Skin softening M k button The camera detects people’s faces in images and creates a copy with softer facial skin tones. 1 Press the multi selector H or I to select the degree of softening and then press the k button. • The confirmation dialog is displayed with the face to which the effect was applied enlarged in the center of the monitor. • To exit without saving the copy, press J.
g Small Picture: Reducing the Size of an Image Press the c button (playback mode) M d button M g Small picture M k button You can create a small copy of the current image. 1 2 Press the multi selector H or I to select the desired copy size and then press the k button. Small pic ture 640 × 480 320 × 240 160 × 120 Select Yes and then press the k button. • A new, edited copy is saved as a separate image with a compression ratio of 1:16.
a Crop: Creating a Cropped Copy You can create a copy containing only the portion visible in the monitor when u is displayed with playback zoom (A 64) enabled. 1 Rotate the zoom control to g (i) in full-frame playback mode (A 28) to zoom in on the image. • To crop an image displayed in “tall” (portrait) orientation, zoom in on the image until the black bars displayed on the both sides of the monitor disappear. The cropped image is displayed in landscape orientation.
C Image Size • As the area to be saved is reduced, the image size (pixels) of the cropped copy is also reduced. • Images cropped to an image size of 320 × 240 or 160 × 120 are 15/05/2013 15:30 smaller than other images when displayed during playback, and 0005. JPG are indicated by A.
Editing Movies The desired portions of a recorded movie can be saved as a separate file. 1 Play back the desired movie and pause playback (A 81). 2 Press the multi selector J or K to select the I control, and then press the k button. • The movie edit screen is displayed. 1m30s 3 Press H or I to select the M control (choose start point). Reference Section • When you start editing a movie, the frame displayed when the movie was paused is the start point of the edit.
5 When the settings are finished, press H or I to select m Save and then press the k button. 6 Select Yes and then press the k button. • The edited movie is saved. S ave O K ? Yes No B Notes About Movie Editing C Reference Section • In the following situations, I is not displayed in the controls and editing is not possible. - When you try to trim a movie that was created by editing A movie that was created by editing cannot be trimmed.
Connecting the Camera to a TV (Viewing Images on a TV) Connect the camera to a TV using the optional audio/video cable (E68) to play back images on the TV. 1 2 Turn off the camera. Connect the camera to the TV. • Connect the yellow plug of the audio/video cable to the video-in jack and the white plug to the audio-in jack on the TV. Yellow Reference Section 3 White Set the TV’s input to external video input. • See your TV’s documentation for details. 4 Hold down the c button to turn on the camera.
B Notes About Connecting the Cable When connecting the cable, be sure that the camera connector is properly oriented, do not insert the cable at an angle, and do not use excessive force. When disconnecting the cable, do not pull the connector at an angle. B If the Images Are Not Displayed on the TV Be sure that the camera’s Video mode (E60) in the setup menu matches the standard used by your TV.
Connecting the Camera to a Printer (Direct Print) Users of PictBridge-compatible (F20) printers can connect the camera directly to the printer and print images without using a computer. Follow the procedures below to print images.
B Notes About Power Source • When connecting the camera to a printer, use batteries with a sufficient amount of charge remaining to prevent the camera from turning off unexpectedly. • You can use the AC Adapter EH-67 (available separately) to power the camera from an electrical outlet. Do not use any other make or model of AC adapter as it may cause the camera to heat up or malfunction.
3 Connect the camera to the printer using the included USB cable. • Be sure that connectors are properly oriented, do not insert the cable at an angle, and do not use excessive force. When disconnecting the cable, do not remove the cable at an angle. 4 Turn on the camera. • When properly connected, the PictBridge startup screen is displayed in the camera monitor, followed by the Print selection screen. Print selec tion Reference Section E18 15/05 2013 NO.
Printing Individual Images After properly connecting the camera to the printer (E17), follow the procedures described below to print an image. 1 Use the multi selector to select the desired image and then press the k button. Print selec tion 15/05 2013 • To make it easier to select images, rotate the zoom control to f (h) to switch to 12-image thumbnail playback mode. Rotate the zoom control to g (i) to switch to fullframe playback mode. 2 Select Copies and then press the k button. NO.
4 Select Paper size and then press the k button. PictBridge 0 0 4 prints Star t print Copies Paper size 5 Select the desired paper size and then press the k button. • To specify paper size using settings on the printer, select Default in the paper size option. 6 Select Start print and then press the k button. Paper size Default 3.5×5 in. 5×7 in. A4 100×150 mm 4×6 in. 8×10 in. PictBridge 0 0 4 prints Reference Section Star t print Copies Paper size 7 Printing begins.
Printing Multiple Images After properly connecting the camera to the printer (E17), follow the procedures described below to print multiple images. 1 When the Print selection screen is displayed, press the d button. 2 Use the multi selector to select Paper size and then press the k button. • To exit the print menu, press the d button. 3 Select the desired paper size and then press the k button. • To specify paper size using settings on the printer, select Default in the paper size option.
Print selection Select which images will be printed (up to 99) and Print selec tion 10 how many copies of each image will be printed (up to nine). 1 1 3 • Press the multi selector J or K to select images, and then press H or I to set the number of copies for each. • Images selected for printing are indicated by a Back check mark and the numeral indicating the number of copies to be printed. If no copies have been specified for an image, the selection is canceled.
DPOF printing Print images for which a print order was created using the Print order option (E34). • When the screen shown on the right is displayed, select Start print and then press the k button to start printing. Select Cancel and then press the k button to return to the print menu. • To view the current print order, select View images and then press the k button. To print images, press the k button again.
The Shooting Menu (for A (Auto) Mode) Image Mode (Image Size and Quality) Enter shooting mode M d button M Shooting menu M Image mode M k button You can select the combination of image size and image quality (i.e., image compression ratio) that is used when saving images. The higher the image mode setting, the larger the size at which images can be printed, and the lower the compression ratio, the higher the quality of the images, but the number of images that can be saved (E25) is reduced.
C Number of Images That Can Be Saved The following table lists the approximate number of images that can be saved on a 4 GB memory card. Note that due to JPEG compression, the number of images that can be saved varies greatly depending on the composition of the image, even when memory capacity and image mode settings remain constant. The number of images that can be saved may also vary depending on the type of memory card being used.
White Balance (Adjusting Hue) Enter A (auto) mode M d button M White balance M k button The color of light reflected from an object varies with the color of the light source. The human brain is able to adapt to changes in the color of the light source, with the result that white objects appear white whether seen in the shade, direct sunlight, or under incandescent lighting. Digital cameras can mimic this adjustment by processing images according to the color of the light source.
Using Preset Manual Preset manual is used with unusual lighting or to compensate for light sources with a strong color cast when the desired effect has not been achieved with white balance settings like Auto and Incandescent (for example, to make images shot under a lamp with a red shade look as though they had been shot under white light). Use the procedure below to measure the white balance value under the lighting used when shooting.
4 Frame the reference object in the measuring window. Preset manual Cancel Measure Measuring window 5 Press the k button to measure a value for preset manual. • The shutter is released and the new white-balance value is set. No image is saved. Reference Section B Notes About White Balance • Some settings cannot be used with other functions (A 58). • Lower the flash or set the flash to W (off) when white balance is set to any setting other than Auto and Flash (A 46).
Continuous Shooting Enter A (auto) mode M d button M Continuous M k button You can change settings to continuous or BSS (best shot selector). Option U Single (default setting) V Continuous D BSS (best shot selector) One picture is taken each time the shutter-release button is pressed. While the shutter-release button is held all the way down, about four images are captured continuously at a rate of about 1.2 fps (when Image mode is set to P 4608×3456).
B Notes About Multi-shot 16 Smear (F3) visible in the monitor when shooting with Multi-shot 16 enabled is saved with images. Avoiding bright objects such as the sun, reflections of the sun, and electric lights when shooting with Multi-shot 16 enabled is recommended. ISO Sensitivity Enter A (auto) mode M d button M ISO sensitivity M k button When ISO sensitivity is increased, less light is needed when taking pictures. Higher ISO sensitivity allows darker subjects to be captured.
Color Options Enter A (auto) mode M d button M Color options M k button You can adjust the colors when images are saved. Option Description n Standard color (default setting) Use to achieve natural colors in your images. o Vivid color Use to achieve vivid colors in your images. p Black-and-white Use to save images in black-and-white. q Sepia Use to save images in sepia tones. r Cyanotype Use to save images in cyan-blue monochrome.
The Smart Portrait Menu • See “Image Mode (Image Size and Quality)” (E24) for information about Image mode. Skin Softening Enter smart portrait mode M d button M Skin softening M k button You can change skin softening settings. Option Description When the shutter is released, the camera detects one or more person’s e On (default setting) faces (up to three), and processes the image to soften facial skin tones before saving the image. k Off Turns skin softening off.
Smile Timer Enter smart portrait mode M d button M Smile timer M k button The camera detects people’s faces and then automatically releases the shutter whenever a smile is detected. Option Description a On (default setting) Enables the smile timer. k Off Turns the smile timer off. The icon for the current setting is displayed in the monitor when the camera is in shooting mode (A 8). No icon is displayed when Off is selected.
The Playback Menu • See “Editing Still Images” (E5) for information about image editing features. a Print Order (Creating a DPOF Print Order) Press the c button (playback mode) M d button M a Print order M k button When printing images saved on the memory card using any of the following methods, the Print order option in the playback menu is used to create digital “print orders.” • Inserting the memory card into a DPOF-compatible (F20) printer’s card slot. • Taking the memory card to a digital photo lab.
2 Select images (up to 99) and the number of copies (up to nine) of each. Print selec tion 1 1 3 • Press the multi selector J or K to select images, and then press H or I to set the number of copies for each. • Images selected for printing are indicated by a check mark icon and the numeral indicating the number of copies to be Back printed. If no copies have been specified for an image, the selection is canceled. • Rotate the zoom control to g (i) to switch to full-frame playback mode.
B Notes About Printing Shooting Date and Shooting Information When the Date and Info settings are enabled in the print order option, shooting date and shooting information are printed on images when a DPOF-compatible printer (F20) that supports printing of shooting date and shooting information is used. • Shooting information cannot be printed when the camera is connected to a DPOF-compatible printer via the included USB cable (E23).
b Slide Show Press the c button (playback mode) M d button M b Slide show M k button You can play back images, saved in the internal memory or on a memory card, one by one in an automated “slide show.” 1 Use the multi selector to select Start and then press the k button. • To change the interval between images, select Frame intvl, select the desired interval time, and then press the k button before selecting Start.
B Notes About Slide Show • Only the first frame of movies is displayed. • The maximum playback time is up to about 30 minutes even if Loop is enabled (E57). d Protect Press the c button (playback mode) M d button M d Protect M k button You can protect selected images from accidental deletion. Select images to protect or cancel protection for previously protected images from the image selection screen.
The Image Selection Screen When using one of the following features, a screen like that Protec t shown on the right is displayed when selecting images. • Print order > Select images (E34) • Protect (E38) • Rotate image (E40) • Copy > Selected images (E41) Back • Welcome screen > Select an image (E46) • Delete > Erase selected images (A 30) • Print selection when printing directly to a printer (E19, E22) ON/OFF Follow the procedures described below to select images.
f Rotate Image Press the c button (playback mode) M d button M f Rotate image M k button After shooting, you can change the orientation in which still images are displayed. Still images can be rotated 90 degrees clockwise or 90 degrees counterclockwise. When you select an image you want to rotate in the image selection screen (E39), the Rotate image screen is displayed. You can then rotate the image 90 degrees by pressing the multi selector J or K.
h Copy (Copy Between Internal Memory and Memory Card) Press the c button (playback mode) M d button M h Copy M k button You can copy images between the internal memory and a memory card. 1 Use the multi selector to select a destination option to which images are copied and then press the k button. Copy Camera to card Card to camera • Camera to card: Copies images from internal memory to memory card. • Card to camera: Copies images from memory card to internal memory.
B Notes About Copying Images • JPEG and MOV files can be copied. • Operation is not guaranteed with images captured with another make of camera or that have been modified on a computer. • When copying images for which Print order (E34) options are enabled, the print order settings are not copied. However, when copying images for which Protect (E38) is enabled, the protect setting is copied. C If “Memory contains no images.
The Movie Menu Movie Options Enter shooting mode M d button M D tab M Movie options M k button You can select the desired movie option for recording movies. Larger image sizes and faster movie bit rates produce greater image quality and larger movie file sizes. Image size (pixels) Aspect ratio Movie bit rate n HD 720p (default setting) 1280 × 720 16:9 Approx. 9 Mbps m VGA 640 × 480 4:3 Approx. 3 Mbps Option • The frame rate is approx. 30 fps no matter which option is selected.
C Maximum Movie Recording Time The following table lists the approximate recording time available when using a 4 GB memory card. Actual recording time and file size may vary depending on subject movement and image composition, even when memory capacity and movie settings remain constant. Available recording time may also vary depending on the type of memory card being used.
Autofocus Mode Enter shooting mode M d button M D tab M Autofocus mode M k button You can select how the camera focuses in movie mode. Option Description A Single AF (default setting) Focus is locked when the b (e movie-record) button is pressed to start recording. Select this option when the distance between the camera and the subject remains fairly consistent. B Full-time AF Camera focuses continuously.
The Setup Menu Welcome Screen d button M z tab M Welcome screen M k button You can configure the welcome screen that is displayed when you turn on the camera. Option Description COOLPIX The camera displays a welcome screen and enters shooting or playback mode. Select an image Displays an image selected for the welcome screen. When the image selection screen is displayed, select an image (E39) and then press the k button.
Time Zone and Date d button M z tab M Time zone and date M k button You can set the camera clock. Option Date and time Description Allows you to set the camera’s clock to the current date and time. Use the multi selector to set each item displayed on the screen. • Select an item: Press K or J (changes between D, M, Y, hour, minute). • Edit the highlighted item: Press H or I. • Apply the setting: Select the minute setting and then press the k button.
Selecting the Travel Destination Time Zone 1 Use the multi selector to select Time zone and then press the k button. Time zone and date 15/05/2013 15:30 London, Casablanca Date and time Date format Time zone 2 Select x Travel destination and then press the k button. • The date and time displayed in the monitor changes according to the region currently selected. D/M/Y Time zone London, Casablanca 15/05/2013 15:30 Home time zone Travel destination 3 Press K.
4 Press J or K to select the travel destination time zone. • If daylight saving time is in effect, press H to enable daylight saving time function. W is displayed at the top of the monitor and the camera clock is advanced one hour. Press I to disable the daylight saving time. • Press the k button to apply the travel destination time zone. • For other time zones, set the camera clock to local time using the Date and time setting.
Monitor Settings d button M z tab M Monitor settings M k button You can set the options below. Option Description Photo info Select information displayed in the monitor during shooting and playback. Brightness Select from five settings for monitor brightness. The default setting is 3. Photo Info You can select whether or not the photo information is displayed in the monitor. Shooting mode Playback mode 15/05/2013 15:30 0004.
Shooting mode Playback mode 15/05/2013 15:30 0004. JPG Framing grid+auto info 29m 0s 970 In addition to information shown with Auto info, a framing grid is displayed to help frame pictures. The framing grid is not displayed when recording movies. 4/ 4 The same information as in Auto info is displayed. The same information as in Auto info is displayed.
Print Date (Imprinting Date and Time) d button M z tab M Print date M k button The shooting date and time can be imprinted on the images when shooting, allowing the information to be printed even from printers that do not support date printing (E36). 15.05.2013 Option Description f Date Date is imprinted on images. S Date and time Date and time are imprinted on images. k Off (default setting) Date and time are not imprinted on images.
Vibration Reduction d button M z tab M Vibration reduction M k button You can select the vibration reduction setting used when shooting. Vibration reduction allows you to reduce the effects of camera shake, which commonly occurs when shooting with zoom applied or when shooting at slow shutter speeds. The effects of camera shake are reduced when recording movies, in addition to when shooting still images. Set Vibration reduction to Off when shooting using a tripod to stabilize the camera.
Motion Detection d button M z tab M Motion detection M k button You can select the motion detection setting—which reduces the effects of subject movement and camera shake—used when shooting still images. Option Description U Auto (default setting) When the camera detects subject movement or camera shake, the ISO sensitivity and shutter speed are automatically increased to reduce blurring.
AF Assist d button M z tab M AF assist M k button You can enable or disable the AF-assist illuminator, which assists autofocus operation when the subject is dimly lit. Option Description Auto (default setting) The AF-assist illuminator lights automatically when the subject is dimly lit. The illuminator has a range of about 4.5 m (14 ft) at the maximum wide-angle position and about 3.0 m (9 ft 10 in.) at the maximum telephoto position.
Sound Settings d button M z tab M Sound settings M k button You can adjust the following sound settings. Option Description Button sound Select On (default setting) or Off. When On is selected, a beep sounds once when operations are completed successfully, two times when the focus has been locked, and three times when an error is detected, and the welcome sound is played when the camera is turned on. Shutter sound Select On (default setting) or Off.
Auto Off d button M z tab M Auto off M k button If no operations are performed for a specified amount of time, the monitor turns off and the camera enters standby mode to save power (A 21). This setting determines the amount of time that passes before the camera enters standby mode. Option Description Auto off You can select 30 s (default setting), 1 min, 5 min, or 30 min.
Format Memory/Format Card d button M z tab M Format memory/Format card M k button Use this option to format the internal memory or a memory card. Formatting the internal memory or memory cards permanently deletes all data. Data that has been deleted cannot be recovered. Be sure to transfer important data to a computer before formatting. Formatting the Internal Memory Format memory To format the internal memory, remove the memory card from the camera.
Language d button M z tab M Language M k button You can select one of 29 languages for display of camera menus and messages.
Video Mode d button M z tab M Video mode M k button You can adjust settings for connection to a TV. Set the camera’s analog video output signal to NTSC or PAL according to the specification of your TV.
The Blink Warning Screen When the Did someone blink? screen shown on the right is displayed in the monitor, the operations described below are available. If no operations are performed within a few seconds, the camera automatically returns to shooting mode. Did someone blink? Exit Function Description Enlarge the detected face that blinked Rotate the zoom control to g (i). Switch to full-frame playback mode Rotate the zoom control to f (h).
Eye-Fi Upload d button M z tab M Eye-Fi upload M k button You can select whether or not the camera’s Eye-Fi card (available from third-party manufacturers) sends images to your computer. Option Description b Enable Images created with this camera are uploaded to the pre-determined computer. c Disable (default setting) Images are not uploaded. B Notes About Eye-Fi Cards Reference Section • Note that images are not uploaded if signal strength is insufficient even if Enable is selected.
Reset All d button M z tab M Reset all M k button When Reset is selected, the camera’s settings are restored to their default values. Basic Shooting Functions Option Default value Flash mode (A 46) Auto Self-timer (A 49) Off Macro mode (A 51) Off Exposure compensation (A 53) 0.
Shooting Menu Option Default value Image mode (E24) P 4608×3456 White balance (E26) Auto Continuous (E29) Single ISO sensitivity (E30) Auto Color options (E31) Standard color Movie Menu Option Default value Movie options (E43) HD 720p (1280×720) Autofocus mode (E45) Single AF Wind noise reduction (E45) Off Setup Menu Option Welcome screen (E46) Default value None Reference Section Photo info (E50) Auto info Brightness (E50) 3 Print date (E52) Off Vibration reduction (E53) On M
Sleep mode (E57) On Blink warning (E60) Off Eye-Fi upload (E62) Disable Others Option Default value Paper size (E20, E21) Default Frame interval for slide show (E37) 3s Loop setting for slide shows (E37) Off Reference Section • Selecting Reset all also resets the camera’s file numbering (E67). After a reset, the camera determines the largest file number in the internal memory or on the memory card and saves images using the next available file number.
Battery Type d button M z tab M Battery type M k button To ensure that the camera shows the correct battery level (A 20), select the type that matches the batteries currently in use.
File and Folder Names Images and movies are assigned file names as follows. D S C N 00 0 1 . J P G Identifier (not shown on camera monitor) Original still images, movies DSCN Small copies SSCN Cropped copies RSCN D-Lighting copies, skin softening copies, edited movies FSCN Extension (indicates file format) Still images .JPG Movies .
Optional Accessories • Battery Charger MH-73 (includes four EN-MH2 rechargeable Ni-MH Battery charger, batteries) rechargeable batteries* • Replacement rechargeable batteries: Rechargeable Ni-MH batteries EN-MH2-B4 (set of four EN-MH2 batteries) AC adapter AC Adapter EH-67 Audio/video cable Audio Video Cable EG-CP14 Hand strap Hand Strap AH-CP1 * When using EN-MH2 rechargeable Ni-MH batteries with the camera, charge the batteries four at a time using Battery Charger MH-73.
Error Messages Display A Cause/Solution 4, 20 O (flashes) Clock not set. Set date and time. E47 Battery exhausted. Replace the batteries. 12 Q (flashes in red) Camera cannot focus. • Refocus. • Use focus lock. 26, 61 60 Please wait for the camera to finish recording. Wait until the image is saved and the message disappears from the display. – Memory card is write protected. Write-protect switch is in “lock” position. Slide write-protect switch to “write” position.
Display Cause/Solution Card is not formatted. Format card? Yes No Memory card has not been formatted for use in the camera. Formatting deletes all data saved on the memory card. Be sure to select No and make copies of any images which need to be kept before formatting the memory card. Select Yes and then press the k button to format the memory card. Out of memory. Memory card is full. • Change the image mode setting. • Delete images. • Insert new memory card.
Display A Cause/Solution Image cannot be modified. Cannot edit selected image. • Select images that support editing function. • Movies cannot be edited. E6 – Cannot record movie. Time out error while saving movie on the memory card. Select a memory card with faster write speed. 14 Memory contains no images. No images in the internal memory or memory card. • Remove the memory card from the camera to play back images saved in the camera’s internal memory.
Display A Cause/Solution Reference Section System error Error has occurred in camera’s internal circuitry. Turn camera off, remove and reinsert batteries, and turn camera on. If error persists, contact retailer or Nikonauthorized service representative. 12, 21 Printer error: check printer status. Printer error. Check printer. After solving the problem, select Resume and then press the k button to resume printing.* – Printer error: check paper Specified size of paper is not loaded in printer.
Technical Notes and Index Caring for the Product...............................................F2 The Camera.............................................................................................................F2 Batteries ...................................................................................................................F4 Memory Cards .......................................................................................................F6 Cleaning and Storage........................
Caring for the Product The Camera To ensure safe and continued enjoyment of your Nikon camera, observe the following precautions and the precautions noted in “For Your Safety” (A ix-xv) when using or storing your camera. B Do Not Subject the Product to Strong Shocks The product may malfunction if dropped or struck. Additionally, do not touch or apply force to the lens.
B Turn the Camera off Before Removing the Batteries, AC Adapter, or Memory Card Removing the batteries, AC adapter, or memory card while the camera is on could damage the camera or memory card. If removed while the camera is saving or deleting data, data may be lost and the camera's memory or the memory card may be damaged. B Notes on the Monitor • Monitors and electronic viewfinders are constructed with extremely high precision; at least 99.99% of pixels are effective, with no more than 0.
Batteries Be sure to read and follow the warnings noted in “For Your Safety” (A ix-xv) before use. B Notes About Using Batteries • Used batteries may overheat. Handle with caution. • Do not use batteries beyond their recommended expiration date. • Do not turn the camera on and off repeatedly if discharged batteries are inserted in the camera. B Spare Batteries We recommend carrying spare batteries depending on where you are shooting. It may be difficult to purchase batteries in certain areas.
B Notes About Rechargeable Ni-MH Batteries • If you repeatedly charge rechargeable Ni-MH batteries while they still have some charge remaining, the message Battery exhausted. may be displayed prematurely when using the batteries. This is due to the “memory effect,” in which the amount of charge the batteries can hold decreases temporarily. Use the batteries until there is no charge remaining and they will return to their normal behavior. • Rechargeable Ni-MH batteries discharge even when not being used.
Memory Cards • • • • • Technical Notes and Index Use only Secure Digital memory cards. Approved memory cards ➝ F19 Observe the precautions noted in the documentation included with your memory card. Do not affix labels or stickers to the memory card. Do not format the memory card using a computer. Before using a memory card with this camera, format the card using this camera if the card has been used with another device. Before using a new memory card, we recommend using this camera to format the card.
Cleaning and Storage Cleaning Do not use alcohol, thinner, or other volatile chemicals. Lens When cleaning the lens, avoid touching it directly with your fingers. Remove dust or lint with a blower. To remove fingerprints, oil, or other grime that cannot be removed with a blower, wipe the lens with a soft, dry cloth or an eyeglass cleaning cloth, using a gentle spiral motion that starts in the center and moves toward the edges.
Troubleshooting If the camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon-authorized service representative. Power, Display, Settings Issues Cause/Solution A – 12, 13, 21, E68 The camera is on but does not respond. • Wait for recording to end. • If the problem persists, turn the camera off.
Problem A Cause/Solution 84, E50 F7 Date and time of recording are not correct. • If camera clock has not been set, O flashes when shooting images and recording movies. Images and movies saved before clock is set are dated “00/ 00/0000 00:00” or “01/01/2013 00:00” respectively. Set the correct time and date using Time zone and date in the setup menu. • Check camera clock regularly against more accurate timepieces and reset as required. 16, 84, E47 No indicators displayed in monitor.
Shooting Issues Problem A Cause/Solution Cannot switch to shooting mode. Disconnect USB cable. • When camera is in playback mode, press the A button, the shutter-release button, or the b (e movie-record) button. • When menus are displayed, press the d button. • Batteries are exhausted. • When flash lamp flashes, flash is charging. 28 No image captured when the shutter-release button is pressed. 34, 38, 51 Camera cannot focus. • Subject is too close.
Problem Flash does not fire. A Cause/Solution • The flash is lowered or the flash mode is set to W (off). • Scene mode with which the flash does not fire is selected. • On is selected for Blink proof in smart portrait menu. • Another function that restricts flash is enabled. 5, 46 54 57, E33 58 Digital zoom cannot be used. • Digital zoom cannot be used in the following situations.
Problem A Cause/Solution Technical Notes and Index 46 Images are too dark (underexposed). • The flash is lowered or the flash mode is set to W (off). • Flash is blocked by finger or other object. • Subject is beyond flash range. • Adjust exposure compensation. • Increase ISO sensitivity. • Subject is backlit. Select Backlighting scene mode, or raise the flash and set the flash mode to X (fill flash). Images are too bright (overexposed). Adjust exposure compensation.
Playback Issues Problem A Cause/Solution – File cannot be played back. • File or folder was overwritten or renamed by computer or other make of camera. • This camera cannot play back movies recorded with another make or model of digital camera. – Cannot zoom in on image. • Playback zoom cannot be used with movies, small pictures, or images that have been cropped to a size of 320 × 240 or smaller. • This camera may not be able to zoom in on images captured with another make or model of digital camera.
Problem Nikon Transfer 2 does not start when camera is connected. Camera is off. Batteries are exhausted. USB cable is not correctly connected. Camera is not recognized by the computer. Confirm system requirements. Computer is not set to start Nikon Transfer 2 automatically. For more information about Nikon Transfer 2, refer to help information contained in ViewNX 2. Images to be printed are not displayed. • Memory card contains no images. Replace the memory card.
Specifications Nikon COOLPIX L320 Digital Camera Type Compact digital camera Number of effective pixels 16.1 million Image sensor 1 Lens NIKKOR lens with 26x optical zoom /2.3-in. type CCD; approx. 16.44 million total pixels Focal length 4.0–104.0 mm (angle of view equivalent to that of 22.5–585 mm lens in 35mm [135] format) f/-number f/3.1–5.9 Construction 12 elements in 9 groups (1 ED lens element) Digital zoom magnification Up to 4× (angle of view equivalent to that of approx.
Storage Media Internal memory (approx. 49 MB), SD/SDHC/SDXC memory card File system DCF, Exif 2.3, and DPOF compliant File formats Still pictures: JPEG Movies: MOV (Video: H.
Interface Data transfer protocol Hi-Speed USB MTP, PTP Video output Can be selected from NTSC and PAL I/O terminal Audio/video (A/V) output; digital I/O (USB) DC input connector Supported languages Arabic, Chinese (Simplified and Traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hindi, Hungarian, Indonesian, Italian, Japanese, Korean, Norwegian, Polish, Portuguese (European and Brazilian), Romanian, Russian, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese Power sour
1 Figures based on the Camera and Imaging Products Association (CIPA) standards for measuring the endurance of camera batteries. Performance for still pictures measured under the following test conditions: P 4608×3456 selected for Image mode, zoom adjusted with each shot, and flash fired with every other shot. Movie recording time assumes that n HD 720p (1280×720) is selected for Movie options. Figures may vary with use, the interval between shots, and the length of time menus and images are displayed.
Approved Memory Cards The following Secure Digital (SD) memory cards have been tested and approved for use in this camera. • Memory cards with an SD Speed Class rating of 6 or faster are recommended for recording movies. When using a memory card with a lower Speed Class rating, movie recording may stop unexpectedly.
Supported Standards • DCF: Design Rule for Camera File System is a standard widely used in the digital camera industry to ensure compatibility among different makes of camera. • DPOF: Digital Print Order Format is an industry-wide standard that allows images to be printed from print orders saved on memory cards. • Exif version 2.3: Exchangeable image file format (Exif) version 2.
Index Symbols A AC adapter ........................................... 13, E68 AF assist................................................. 84, E55 AF-assist illuminator ........................................... 2 Alkaline batteries............................................... 12 Aperture value .................................................... 27 Audio/video cable ...................................... 67, 68, E14, E68 Audio/video-in jack ....................... 68, E14 Auto flash ..................
Blink warning..................................... 85, E60 Brightness ..................................................... E50 BSS............................................................ 38, E29 Built-in microphone ........................................... 3 Button sound.............................................. E56 C Calendar display ................................................ 65 Close-up k .......................................................... 38 Color options........................
Full-frame playback mode .......................... 28 Full-time AF ........................................ 79, E45 H Help ........................................................................... 36 I Identifier......................................................... E67 Image copy ......................................... 66, E41 Image mode....................................... 57, E24 Imprinting date and time ........... 19, E52 Internal memory.................................................
Playback menu ................................. 66, E34 Playback mode ................................................... 28 Playback zoom................................................... 64 Portrait b .............................................................. 36 Power............................................................... 20, 21 Power switch .............................................. 20, 21 Power switch/power-on lamp... 2, 20, 21 Preset manual ............................................
Time difference ......................................... E48 Time zone ............................................ 17, E47 Time zone and date.............. 16, 84, E47 Tripod socket ........................................... 3, F17 TV .............................................................. 68, E14 U USB cable .................................... 67, 72, E18 USB/audio/video output connector ................................. 2, 67, 72, E14, E16 V Vibration reduction........................
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.
