Specifications

Page | 27
OUT2 LED
The orange OUT2 energizes whenever the process temperature is two degrees (2°F/ºC)
or more above the To Process set point. The compressor then comes on and runs until
the temperature at the To Process thermocouple is two degrees (2°F/ºC) below the set
point.
This +2°F/ºC control set point is factory-set for proper compressor operation. Changing
it is not recommended without consulting the Fleming Dynamics Service Department.
MANU LED
The orange MANU LED does not light because it is not used.
STOP LED
The orange STOP LED does not light because it is not used.