User manual

- Be sure to read the user’s manual and cautions on handling thoroughly before using the cell.

- Batteries have cycle life. Replace failed cell with a new cell that is the same brand immediately after normal life cycle

expiration, or if expiration has occurred prematurely.

Store battery in a low-humidity and low-temperature environment if the battery won’t be used for an extended period of

time.

- Keep it far away from articles or materials with static electric charges while the cell is charged, used or stored.

- Wipe with a dry cloth before using the cell if the terminals of the cell become dirty.

SAFETY INSTRUCTIONS OF TRAVEL CHARGER

Please read the following information carefully.

1. The maximum ambient temperature of the travel charger shall not exceed 40°C (104 degrees F).

2. The Travel Charger shall be installed according to specification. The current of load and output power shall not

exceed the following value:

Input: AC100-240V~ 50/60Hz 0.15A

Output: DC5V 1A

3. The Travel Charger shall be used for I.T. equipment only.

4. For indoor use only.

5. Cleaning – Unplug this from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners to

clean; use only a dry cloth.

6. Water and moisture – Do not use this product under moist environment.

7. Self-servicing – Attempting to service this product on your own, or opening or removing device covers may result in

exposure to dangerous voltage or other hazards.

8. Unplug this apparatus during lighting storms or when unused for lengthy durations.

9. This Travel Charger is not intended to be repaired by service personnel in case of failure or component defect.

FCC NOTICE AND CAUTIONS

This device and its accessories comply with Part 15 of FCC Rules.

Operation is subject to the following conditions:

(1) This device and its accessories may not cause harmful interference.

(2) This device and its accessories must accept any interference received, including interference that may cause

undesired operation.

Part 15.21 Statement：

Changes or modifications that are not expressly approved by the manufacturer could void the user’s authority to operate

the equipment.

Part of Statement 15.105:

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the

Downloaded from www.Manualslib.com manuals search engine