User manual

84
 To disable Wi-Fi, tap the slider again .
4. Tap a Wi-Fi network to connect, enter the password (if it’s not an open network), and then tap
Connect.
 Your phone is connected to the Wi-Fi network. You will see ( ) in the status bar.
 The password, for a household wireless LAN router, is sometimes found on a sticker on the
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
 Entering a password is not required if an access point is not security protected.
Note: The next time your phone connects to a previously accessed secured wireless network, you will not
be prompted to enter the password again, unless you reset your phone to its factory default settings or
you instruct the phone to forget the network.
Note: Wi-Fi networks are self-discoverable, which means no additional steps are required for your phone
to connect to a Wi-Fi network. It may be necessary to provide a user name and password for certain
closed wireless networks.
Disconnect Wi-Fi
You may wish to disconnect from a connected Wi-Fi network without turning Wi-Fi off.
1. Swipe up on Home button twice, and tap Settings .
2. Tap Network & internet > Wi-Fi.
 The Wi-Fi settings menu appears.
3. Tap the name of the connected access point and then tap Forget.
 Wi-Fi is disconnected.
 After disconnecting from an access point, you may need to re-enter the password to
reconnect.
Wi-Fi Direct
Use Wi-Fi Direct to connect directly to other Wi-Fi Direct devices simply via Wi-Fi, without an access point
or via the Internet.
1. Swipe up on Home button twice, and tap Settings .
2. Tap Network & internet > Wi-Fi.
 The Wi-Fi settings menu appears.
3. Tap the Wi-Fi slider to turn Wi-Fi on .
 Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.