User guide

CoolMax USA
• Internet Protocol (TCP/IP)
If you do not see either Client for Microsoft Networks or Internet Protocol
(TCP/IP) in your list, you will need to add them. For either, the method is to
click the Install... button, click the type of component (Client or Protocol), and
then click the Add... button. Next, click the component you want to add, and
click the OK button. You should see the component added to the list with the
others.
 Configuring TCP/IP
Now click Internet Protocol (TCP/IP) and then click Properties to open the
Internet Protocol (TCP/IP) Properties dialog box, shown in bellow
If you are using DHCP on your network to assign IP addresses dynamically,
select the "Obtain IP address automatically" radio button. Otherwise, select the
"Use the following address:" radio button, and fill in the computer's IP address
and netmask in the spaces provided. You or your network manager should
have selected an address for the client on the same subnet (LAN) as the
Samba server. For example, if the server's address is 192.168.1.1 and its
network mask is 255.255.255.0, you might use the address 192.168.1.12 (if it
is available) along with the same netmask. You can also fill in the IP address of
the default gateway.