Installation & User Guide English Version 1.
SYSTEM ALERTS & TROUBLESHOOTING System Alerts Domino A.L.C. monitors system status and provides both visual and auditory alerts if operation outside of acceptable ranges is detected. In all alert conditions, the System Alert icon will flash repeatedly and an auditory alert will sound for 10 seconds then continue as a short beep once per minute until normal operating conditions are restored. PRODUCT CONTENTS Included with your Domino A.L.C. is everything pictured below (Fig 1 & 2).
OPERATING INSTRUCTIONS INSTALLATION PROCEDURE Status Display System Alert (flashes) Fan Speed Carefully remove motherboard and position appropriate backplate (LGA 1366 [Part C] or LGA 775 [Part D]) on the underside of the board. It is recom‐ mended to make use of the double‐sided tape provided on the backplate to hold it in place. This will aid with installation process. Remount the motherboard.
PRODUCT INFORMATION LIMITED WARRANTY Disclaimer Congratulations on your purchase of Domino A.L.C.
OPERATING INSTRUCTIONS INSTALLATION PROCEDURE Changing Operation Modes Step 1: Prepare CPU and Install Backplates Important: In order to power the system, select an appropriate 3 or 4‐pin fan header to power Domino A.L.C.. Confirm that all Thermal Regulation systems (e.g., Smart Fan or Q‐Fan) are disabled and the header is configured to deliver 100% power. Refer to BIOS information in your Motherboard manual. Domino A.L.C. has 3 selectable operation modes: Quiet, Performance and Full.
INSTALLATION PROCEDURE INSTALLATION PROCEDURE Step 2: Prepare retention brackets Domino A.L.C. is shipped ready for installation into LGA 775 based systems.
