Unit installation

Cooling Distribution Unit

Disposals Procedure

NOTE: All waste materials must be disposed of in a professional

and responsible manner in strict adherence to environmental

regulations.

The de-commissioning, dismantling and disposal of Cooling

Distribution Units should only be undertaken by experienced

personnel with full adherence to all safety rules, in particular

protection of lungs, eyes and skin from chemicals, dust etc. Only

approved lifting gear and power tools should be used and access

to the work area restricted to authorised personnel.

1. Disconnect unit from electrical supply.

2. Drain and dispose of any heat transfer fluid

through an approved recycling facility.

3. Remove unit to approved recycling facilities

only.