Unit installation

CDU Installation Guide Page 5
Cooling Distribution Unit
* * * I M P O R T A N T N O T ICE * * *
ALL PERSONNEL involved in the installation and maintenance of the Process and Ancillary Equipment,
whether directly or indirectly, MUST read this notice and this complete document prior to the
commencement of ANY WORK.
1. The following information must be READ, FULLY UNDERSTOOD and
ADHERED to AT ALL TIMES.
2. The SAFETY of YOU and OTHER PERSONS MUST be your main concern.
3. NEVER carry out a task until you fully understand what you are being asked
to do and how to do it safely.
4. NEVER carry out a task you feel could be DANGEROUS to you and other
persons.
5. DO NOT carry out any task that you are not qualified to undertake.
6. ALWAYS comply with all SAFETY RULES as laid down by the relevant
Authorities.
7. If you have any questions or concerns over the safety of YOU or OTHER
PERSONS you MUST consult your supervisor within the Company prior to
the commencement of any task.
8. NEVER start work on a unit or remove any casings, guards, doors or covers
without first SWITCHING OFF and isolating the unit and controllers from the
electrical supply.
9. Make sure all ROTATING PARTS ARE AT REST before commencement of
any work on the unit.
10. The Safety Policy of the Company on whose premises the unit is installed
should be read and understood by Maintenance Personnel.
* * * AL W AY S T H I N K S AF E T Y * * *
Throughout this guide, items of importance are highlighted with the following symbols:
CAUTION: Failure to comply may result in damage to the unit
DANGER: Failure to comply may result in personnel injury
SAFETY INSRUCTIONS
Section 1