Unit installation

CDU Installation Guide Page 2
Cooling Distribution Unit
ABOUT THIS DOCUMENT
Using This Document
This document has been designed for viewing as a PDF file and double sided printing
(subject to copyright – see below) for a hard copy. Copies of this document can be
obtained from the address on the front cover.
This is not a controlled document. Distributed copies will not be updated. All
specifications are minimal and subject to change without prior notice as design
improvements occur
Copyright Notice
The confidential information contained in this document is provided solely for use by
the manufacturer’s employees and system owners, and is not to be released to, or
produced for, anyone else. Neither is it to be used for reproduction of this unit or any
of its components. All specifications are nominal and subject to change without prior
notice as design improvements occur.
Disclaimer
The manufacturer shall not be liable for any damages resulting from mis-application
or misuse of its products.
E & OE
GENERAL STATEMENT
Product Standards
Products installed and operated in accordance with instructions, conform to the EMC
directive and essential Health & Safety requirements of the Machinery Directive
91/368/EEC-93/44/EEC & 93/68/EEC. This includes the EMC compatibility directive
89/336/EEC. As standard, units comply with an IP21 rating.
The products are UL listed and certificates will be made available on application to
the address on the front cover.