Installation Guide

2. Download “P2PIPcamHi” from App

store for iPhone or Play store for

Android phone.

• Make sure your smartphone is

connected to Wi-Fi router.

• Open the app and “Click “+” button to

add camera.”

1. Plug in power adapter to the camera .

• IR LED light should be on and camera

head should rotate.

• If not, press and hold the Reset key for

about 15 seconds.

• Camera will make ringing sound and

ready for WiFi set up.

3. While camera is making sound.

• Tap [WiFi Search] to enter WiFi setup

page.

• Enter WIFI Password and tap [setting]

More detailed instruction, Visit our support site For video demonstration. www.ismarUSA.net.

For tech support, email us at info@isolocameras.com Or, call 201-934-1654.

2. Download App

1. Plug in the Power

3. One Key WiFi Setup

1. Add camera by tapping [Search] or

[Scan] buttons.

• Tap on the camera ID discovered.

• Input camera default password “admin”.

• Tap on [Done] button located on the top

right corner.

4. Add Camera

Reset

Button

Power

Input

PAGE 1
. Plug in the Power 1. Plug in power adapter to the camera . • IR LED light should be on and camera head should rotate. • If not, press and hold the Reset key for about 15 seconds. • Camera will make ringing sound and ready for WiFi set up. Reset Button 2. Download App 2. Download “P2PIPcamHi” from App store for iPhone or Play store for Android phone. • Make sure your smartphone is connected to Wi-Fi router. • Open the app and “Click “+” button to add camera.” Power Input 3. One Key WiFi Setup 3.
PAGE 2
6. Video Playback 5. Live View 5. Tap on the camera from the list. • Tap picture icon to play live view. • Tap on Playback to see recorded video. • Tap on for camera setting. 6 • • • Tap on the camera from the list. Tap video icon to play live view. Choose camera from the list. Tap on recorded video from the list. • Drag playback button to fast forward 7. Camera Setting .Use for Cover page 7. Change camera password • Tap [Enter Password] ●Tap on Alarm Setting • Enter New Password.