Installation Guide

WiFi Setup Using Network Cable
1.Download “CoolcamHBP” from App store for
iPhone or Play store for Android phone. Make sure
your smartphone is connected to the Wi-Fi router.
Open the app and “Click here to add camera.”
2.Plug in the power adapter. Plug in
the network cable to the camera and
to router. The camera head will rotate
to initialize for about 10 seconds.
3.Click “skip”. Click “Scan” and scan the QR code on the camera. Enter “admin” for
security code. Click “OK”.
5.If the selected SSID is not correct, click on the triangle in the corner to see the list of
WIFI. Enter your wifi password. Click “OK”. The camera will rotate to set up WiFi.
With NEO Coolcam, Live Smarter & Easier Life!
4. If the camera is online,Click on the setting button. Click “Advanced Setting”. Click
“Manage Wifi Networks”.
Finish. After the camera finishes rotating,you can unplug the network cable and Place
your camera where you want to Set up.
More detailed instruction, Visit our support site For video demonstration.
www.ismartzon.com
For tech support, email us at [e-mail] Or, call 201-327-2358.
Thank you.