User manual

IPCAM User Manual

7 Other setting

7.1 Network Setting

7.11 Basic Network Settings

If the router that the IP camera connect has DHCP function, you can choice “Obain IP from DHCP Server”

else fill in the network parameters manually.

Http Port: In most cases, you can leave this value as 80, however, if your Internet

Service Provider blocks this port, you may switch to another port number such as, 85，8080，8888，9000 Etcs.

(Range from 0 to 65535, pay attention to the same segment of multiple devices must set up different port. The

port t can’t have any conflict with other software or equipment

a. Search tools modification in LAN

Figure58

b.”For administor” “Basic network setting” -Change the port

Figure59

 7.12 WIFI Setting

1) Please enter the wireless net setting page of the wireless Router to find out SSID,

Channel(less than 10), Encryption Authentication as below:

Selec IP Camera, clickright mouse button choice net wor k configurat ion

Set port number

Set Network IP

Set Http Port Number