Installation Guide

2. Plug in the power adapter.
• Plug in the network cable to the
camera and to router.
• The camera head will rotate to
initialize for about 10 seconds.
3. Click “skip”.
• Click “Scan” and scan the QR code on the camera.
• Enter “admin” for security code.
• Click “OK”.
4. If the camera is online,
• Click on the setting button.
• Click “Advanced Setting”
• Click “Manage Wifi Networks”
Quick Installation Setup Guide: WiFi Setup Using Network Cable
5. If the selected SSID is not correct, click on the
triangle in the corner to see the list of WIFI.
• Enter your wifi password.
• Click “OK”
• The camera will rotate to set up WIFI.
1. Download “CoolcamHBP” from App store
for iPhone or Play store for Android phone.
• Make sure your smartphone is connected
to the Wi-Fi router.
• Open the app and “Click here to add
camera.”
Finish
After the camera finishes rotating,
you can unplug the network cable and
Place your camera where you want to
Set up.