Full Product Manual

Network Camera Installation Manual

1.2 Network connection

If you camera has one key set up feature, you do not need to connect the network

cable between the camera and WiFi router.) Skip to 1.4.

1.3 Wifi Connectin using WPS button (If your router or camera does

not have WPS button, please skip this step.)

If your WiFi router and camera both have WPS button, then you can connect the

camera to the WiFi router using WPS button as below:

Fig 1.2

T/F

0 t1 t1+2 t1+10

time

Press WPS button on router

Within specified time press WPS

button on IP camera

WPS Routers time range. WPS time range (IP camera).

Reset camera time range.

1. Press the Router WPS button at 0 second, the Router will set a time range (the

red area), press the IPCAM WPS button during the time range then the WPS is

workable;

2. Press the IPCAM WPS during the red time range, such as start at t1 and end at

t1+2(the blue area);

3.If press the IPCAM WPS more than 10 seconds, the camera will be reset, such

as press at t1 more than t1+10, it is reset function not WPS function.