Instructions / Assembly
INSTALLATION
INSTRUCTIONS
SHADE FABRIC
HEAVY-DUTY
BUILDER’S BLOCK
Congratulations on the purchase of your Coolaroo
®
Builder’s Block Shade Fabric. Please be sure to read the
instructions before installing your fabric.
ADDITIONAL TOOLS NEEDED:
MAINTENANCE: Your Builder’s Block Shade Fabric has been made of the finest
materials and, when properly cared for, will provide years of screening. To clean your
fabric, simply rinse with a hose and allow to dry. Do not store fabric wet. Let fabric dry
completely before storing.
CAUTION: Do NOT attempt to install your Shade Fabric during windy conditions.
Fabric not recommended for use in strong storms or high winds.
Order
accessories online:
coolaroousa.com
© by GALE Pacific Limited. All rights reserved. Coolaroo
®
is a registered trademark of GALE Pacific Limited.
Questions or Comments? Contact us at:
GALE Pacific USA | www.coolaroousa.com | 1-800-560-4667
1
3
2
4
Pull on fabric to
create tension
and make sure
there is no slack
or wrinkles.
Add zip ties on top and bottom edge about 1
foot apart. Ensure that fabric is straight across
the fence throughout the installation.
1 ft.
Unroll and unfold
entire length of
Builder’s Block Shade
Fabric. Use scissors to
cut to desired length
if necessary.
Secure the edge of the fabric
to the top of the fence with a
zip tie. Ensure the bottom of
the fabric is not dragging on
the ground.
0.00.000.000
• Scissors (optional)• Zip Ties • Ladder (optional)