Instructions / Assembly

INSTALLATION
INSTRUCTIONS
SHADE SAIL
READY-TO-HANG
PARTS LIST QTY
1
Triangle Shade Sail
1
2
Pre-Attached 20 ft. Ropes
3
INSTALL PRE-ATTACHED ROPES
A. Identify attachment points that can
withstand occasional windy conditions.
Possible points of attachment may
include reinforced fascias, trees or
secured posts (Fig. 1).
ENSURE THE ROPES ARE SECURE
A. Tighten the ropes and check tension
periodically to make sure the shade sail is
secure (Fig. 2).
1
2
Fig. 1
TreesFascia supports
Fig. 2
Slack Tightened
(2) Pre-attached
20 ft. Ropes
(1) Triangle Shade Sail
MAINTENANCE: Your Shade Sail has been made of the finest materials and, when properly
cared for, will provide years of shade and privacy. To clean your shade, simply rinse with water,
scrub with mild soap or any nonabrasive cleaner, rinse and allow to dry. Do not store shade wet.
CAUTION: Use of solvents or abrasive cleaners may damage the fabric and will void
your warranty. Do not use bleach or chlorine. Do not put in washing machine or dryer.
Do not iron. Do not dry clean.
Take down your shade sail when not in use, or before strong storms, to prevent damage.
Congratulations on the purchase of your Coolaroo
®
Ready-to-Hang Shade Sail. Please be sure to read the
instructions before installing your Shade Sail.
Register and order
replacement parts online:
www.coolaroousa.com
5.04.004.179
© by GALE Pacific Limited. All rights reserved. Coolaroo
®
is a registered trademark of GALE Pacific Limited.
Questions or Comments? Contact us at:
GALE Pacific USA | www.coolaroousa.com | 1-800-560-4667