Full Product Manual

4
www.cool-space.com | 1.800.557.5716 | sales@cool-space.com Rev. 3.1.17
Use & Operation
POWER ON
1. Remove tank cap and ll
water tank with 1 gallon of
any drinkable water (tap, hose,
bottled, or distilled) to the
bottom of the ll basket.
NOTE: Do not overll tank. If
you see water in plastic basket,
the tank is overlled.
2. Replace cap and tighten until
fully sealed.
NOTE: Unit will not function
properly if cap is not fully
tightened.
3. Plug AC/DC power adapter
supply into the power port on
the unit. Plug the three-pronged
plug into an outlet.
4. Press the POWER button at the
top of the unit to turn on the
ash evaporative cooler. Green
light will illuminate.