Full Product Manual

11
www.cool-space.com | 1.800.557.5716 | [e-mail]. 3.1.17
Troubleshooting
PROBLEM CAUSE CORRECTION
Power button is
not illuminating
a.) POWER button is in
the OFF position
b.) Power cord is not
connected
c.) Wall outlet is not
providing power
a.) Press POWER button one
time
b.) Connect power cord and
press POWER button one
time
c.) Find an alternate power
outlet
No air coming
from port
FAN button is in the
OFF position
Press FAN button to activate
(high, med, low)
No atomization
coming from
port
a.) COOL button is in
the OFF position
b.) Water tank is empty
c.) Tank cap is not fully
tightened
d.) Water lter is
clogged
a.) Press COOL button one
time
b.) Fill tank with water
c.) Tighten tank cap
d.) Replace water lter
Water
streaming from
nozzle(s)during
shutdown
Water tank is overlled
• Open tank cap to release
pressure.
• Drain tank to bottom of ll
basket.
• During next start up the
cooling function may
stream water for a few
seconds until the lines have
been cleared.
Water
streaming from
nozzle(s) during
operation
Air lter is clogged
Replace air lter - contact
your COOL-SPACE
representative for parts.