Installation Guide

QUICK-START GUIDE
FLURRY
210
1
UNPACK
• Find the package of (4)
casters and remove
• Lay box on its side and
carefully open the bottom
of the box - DO NOT STAND
UPSIDE DOWN
• Install (4) casters
• Stand unit up on casters
and remove box
2
FILL UP
• Attach the garden hose
• Turn on water supply (oat
valve will shut o water
once lled)
3
PLUG IN
• Plug power cord into a
standard electrical outlet
4
COOL DOWN
• Turn on Pump switch
• Allow water to saturate
cooling media
• Turn on fan and adjust to
desired speed
STOP
REGISTER YOUR FLURRY ONLINE
www.COOL-SPACE.com
DO NOT RETURN TO STORE
For questions regarding warranty or returns
please contact COOL-SPACE customer support
800-557-5716
[e-mail]
IMPORTANT
Evaporative coolers are designed for outdoor and well-ventilated
indoor applications. Water is evaporated to cool the air. Evaporative
cooling requires plenty of fresh air and ventilation.
The temperature change of the projected airow will vary depending
on the temperature, humidity and other variables in your location/
application.
Quick Setup Guide User Tips
The FLURRY is designed for portable, personal cooling. Unlike A/C units
that use chemical refrigerants to reduce the ambient temperature of
entire homes and rooms, the FLURRY uses air and water to cool the
areas and people that need cooling. Increased humidity levels should
be expected.
• Use in an open space with air
circulation.
• Place on a level surface
• Place the unit at least 3 feet
(0.9m) from you and do not
block the cool breeze; as the
maximum cooling eect is felt
directly in the airow.
• DO NOT use in an enclosed
space (small room with closed
windows and doors), as this will
increase the humidity/moisture
and reduce the cooling eect.
Placement
Suggested Applications
• Garages
• Decks or Patios
• Workshops
• Restaurants
• Nurseries and Garden Centers
• Outdoor Markets and Festivals
• Cooling Stations
• Summer Camps