Full Product Manual

Page 2
2.0 UNPACKING YOUR FLURRY
IMPORTANT
Carefully examine the carton for damage before opening. If the carton is
damaged notify the shipping company immediately.
• Find the package of (4) casters
near the top and remove
• Lay box on its side and carefully
open the bottom of the box
• Pull back the bottom flaps of the
box - exposing the underside of
the unit
• Install (4) casters
• Stand unit up on end and remove box
3.0 SET-UP OF THE COOL-SPACE UNIT
The COOL-SPACE FLURRY has been factory tested and is ready to use. The
unit should be placed on a level surface, and the casters locked to prevent
inadvertent movement. Follow instructions below to connect water and
electrical supply.
3.1 CONNECTING THE WATER SUPPLY
!
CAUTION
Do not connect to any water source where water pressure exceeds 120
psi. This will cause permanent damage to the unit.
The FLURRY comes equipped with a
female water source connection. Use a
standard garden hose (not provided) to
connect the water supply to the cooler.
It is not recommended that the unit be
attached to any water source with
operating pressures above 120 psi.