Full Product Manual
Page 9
6.0 TROUBLESHOOTING/REPAIR
!
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the power supply before performing any service or maintenance.
Failure to do so may result in serious injury or death.
6.1 TROUBLESHOOTING
The COOL-SPACE unit consists of three systems: the fan, water distribution and pump. It is important to determine
which system of the COOL-SPACE unit the problem is associated with. This may not always be obvious, in that certain
problems may be associated with more than one system.
When determining which system has a problem, you must dene the associated problem, (e.g. the pump is not
running). Although this might seem a bit simplied, several things may cause this particular problem. So while dening
the problem, a careful check of all systems should be made to fully understand the extent of the problem.
If you have a complete understanding of all of the systems of the COOL-SPACE unit and how they depend on each
other, it will be simple to dene and solve any problem.
NECESSARY TOOLS:
Although the COOL-SPACE unit is designed to be simple to maintain, it will be necessary to have some basic hand tools
(screwdrivers, pliers, adjustable wrenches, etc.) as well as a volt/ohm meter when troubleshooting the electrical system.
!
CAUTION
Please use caution when troubleshooting or repairing all electrical components. Be certain that all power is
disconnected from the COOL-SPACE unit before the cooling pads or fan guard are removed to gain access to the fan.