Full Product Manual

Page 5
3.0 SETUP
3.2 CONNECTING THE ELECTRICAL SUPPLY
IMPORTANT
The COOL-SPACE unit should be plugged into a fused or circuit breaker protected 15 amp, 120 volt, and 60 Hz circuit.
All models utilize standard 120-volt power supply. The unit should be plugged into a fused or circuit breaker protected
15 amp, 120 volt, 60 Hz circuit.
Table 1 shows the amperage requirements for the specic models. If an extension cord is required, refer to Table 2 for
the proper 3-conductor heavy-duty cord required.
!
CAUTION
Do not exceed the amperage ratings of the extension cord. Undersized extension cords result in excessive drops
in voltage, which cause the electric motors to generate excessive heat. This condition results in inecient motor
operation and premature motor failure, WHICH WILL VOID THE WARRANTY.
AMPERAGE REQUIREMENTS
MODEL NUMBER VOLTS ± 10% FREQUENCY (Hz) RUNNING AMPS
CS5-18-VD 120 60 4
CS5-18-V D-TB2 120 60 4
CS6-36-1D 120 60 7.6
CS6-36-VD 120 60 7.6
CS6-50-VD 120 60 9.3
Table 1: Electrical Requirements
3-CONDUCTOR HEAVY- DUTY EXTENSION CORD REQUIREMENTS
LENGTH
(Ft)
CORD SIZE
16 GA 14 GA 12 GA 10 GA
0-50 13 A 18 A 25 A 30 A
50-100 10 A 13 A 18 A 25 A
Table 2: Cord Size Requirements
IMPORTANT
BLIZZARD-50 (SCS6-50-VD) models can not be connected to a GFCI outlet.