User's Manual

Rear Panel
4
2.2 Rear panel
ATSC INPUT
The signal supplied to this connector from a TV antenna will be sent to TV antenna output. Connect a
TV antenna to TV ANT IN.
LOOP OUTPUT
It provides Composite video. Connect the TV scart on TV to TV.
S-VIDEO
Separate Video, better picture quality than Composite.
LNB IN
It receives signals from the LNB in the range of 950 ~ 2150MHz. Connect a satellite dish to DIGITAL
SATELLITE RECEIVER.
IF OUT
It sends signal to another receiver.
VIDEO
It provides composite video output. Connect the Video on TV to VIDEO with RCA cable.
AUDIO (R,L)
It provides stereo audio output. Connect the audio on TV to AUDIO with RCA cable.
YPbPr
Component analog video signal.
IP Connection
Network interface
USB Connection
It receives data by connecting to USB for software upgrading.
SPDIF
Output for connection to a digital amplifier.
RS-232C
It receives data by connecting to PC for software upgrading. Connect with RS-232C cable a PC and
receiver.