User's Manual

TV Aspect Ratio

Select 4:3 for normal TV or 16:9 for wide TV. Then press OK button for its confirmation.

If 4:3 ratio is selected on normal TV for wide channel, both left and right side of the

screen will be a bit trimmed. If 16:9 ratio is selected on normal TV for wide channels the

screen trim symptom will not occur. However the screen will be in narrow view.

Wide screen will be properly viewed, only when wide channel is broadcasting.

Initialization

Press OK button from Initialization. If you want initialization, select OK button,

otherwise, select any button of remote controller. The receiver will be turned off and on

automatically after 1~2 seconds to initialize all the values to factory setting mode.

As this procedure will clear and set to factory default values, end users are not

recommended to operate this function.

Settings and Operations