Use and Care Manual

8 / 18
window frame channel that the window slides in. If necessary mark the kit and cut one end down to properly
fit the opening. (Figures D, E, and F)
3. Attach screws to window kit adapter, to hold sliding panels in place. This is for vertical installs only.
(Figure K)
4. Attach the window kit adapter to the window kit. (Figure G, and I)
5. Place the window kit back into the window with exhaust hose attached to the window kit adapter. (Figure I
and J)
6. Close the window tightly, and your portable air conditioner is now ready to cool!
Note: When using the venting system, keep the exhaust hose as straight as possible. The exhaust hose can be
shortened, but it is not recommended to increase the length of the exhaust hose. Do not use an extension cord with
your portable air conditioner. Pictures are for illustration purpose only.
Figure K
1.4 Installation of the unit