Use and Care Manual

16 / 18

Handle position

Remote control storage area

Remote control

Handle position

1. Surface cleaning

Clean the unit’s surface with a wet soft cloth. Do not use chemical solvents such as alcohol or gasoline to avoid any

damage to unit.

2. Filter cleaning

Clean the filter every two weeks, otherwise it will affect the performance of the unit, if filter is clogged.

2.1 How to clean filter

1. Grip the filter handle and take it out gently in the correct direction shown by the arrow (as Photo).

Notes:

 Use even force to take out the filter to avoid any twist or damage to filter.

 Take the filters of back panel first, then side panel.

2. Clean the filters gently in warm water (about 104℉) mixed with detergent, and dry in the shade.

Notes:

 Do not squash the mesh.

 Do not hit the mesh with sharp objects or brush.

2.2 Installation of the filter

Special note: Be sure to install the filters to side panel at first then the filter into back panel.

1. Aim the end of the filter toward slot then push filter in even force gently into slot.

Notes:

 Install the filter in opposite direction of removal.

 Install the filter into place gently to avoid any damage.

2. To clean the handle and remote control storage area.

1) Take out the remote control (as Photo).

2) Clean the handle position and remote control storage area with a wet, soft cloth.

Note: Do not drip water into the unit.

End of Season Storage