Specifications

11
The new drive mechanism halves the switching time between flame and furnace measurements
(comparison with previous Shimadzu models).
Smallest footprint for a full system Easily attach an autosampler
Direct connection of the autosampler to the
AA instrument minimizes the installation
footprint and simplifies maintenance.
Lamp house
Just slide the cover to the side for easy
replacement of the hollow cathode lamps
through the large opening.
New Atomizer Design Permits Easy Switching Between Flame and Furnace Measurements
Slim, Easy-to-Use Design
The atomizer unit is switched automatically by software
operation. No troublesome replacement of the atomizer unit
is required. No need to disconnect pipes or wires.
In case of the flame measurement of high-concentration
sample, offsetting the burner head from the light axis,
instead of angle adjustment, allows to adjust the sensitivity.
Flame measurement: Burner head
intersects the light axis (red line).
Furnace measurement: Furnace
intersects the light axis (red line).
Flame measurement Furnace measurement
A single autosampler can be used for both flame and
furnace measurements. Simply slide it left or right. No need
to purchase two autosamplers.
* Dimensions do not include ASC-7000. Height (H) does not include protrusions.
AA-7000F/AAC Dual Atomizer System
AA
-
6300
The system with a dual atomizer fits into a 960 mm width
(including power supply for the graphite furnace atomizer),
achieving the world's smallest installation footprint* for a full
system.
* Shimadzu in-house investigation. Current as of November 2008.