Use and Care Manual

www.coolazone.com
6
Basic Operation
INITIAL OPERATION
After ensuring the unit has adequate water for operation and that your
C-100 has been plugged in, turn the Cool-A-Zone C-100 on by pressing
the power button either on the LCD Panel face or as shown on the remote
control on Page 5 of this manual.
POWER
(ON/OFF)
Notes on Powering “On”
POWER:
Turn the device on/off
Power Buttons may be found either
on the right of the LCD Panel or on the
Red Button of the remote control.
Before powering up,
check the following:
- Is the unit level?
- Is the unit’s air fl ow
unobstructed?
TURNING THE C-100 ON THE FIRST TIME...
The C-100 Speed will be at Level 2 and the Cool Function will be listed as
“On” the fi rst time you power up your Cool-A-Zone C-100.
PRESSING “ON” DURING STANDBY
Turning the unit on during a state of stand-by will power up the C-100
in the same mode and airfl ow setting in which it entered the stand-by
mode. Make sure to adjust the settings as appropriate for your comfort
after coming back from stand-by.