Instruction Manual

Issue 3 27/08/2021 6
Notes: (continued)
• The chopping bowl fit with the motor housing is not water
tight. Therefore significant amounts of liquid ingredients
should not be used as the liquid may overflow.
CLEANING
Clean the mini chopper after each use.
1. Switch off and unplug.
2. Lift the motor housing from the chopping bowl and lift out
the inner cover and blade assembly.
3. Wipe the outside of the motor housing with a damp cloth;
do not use detergents or abrasives as these may scratch
the surface. Never immerse the motor housing, cable or
plug in water.
4. Wipe the underside of the motor housing with a damp cloth
(not wet) dishcloth soaked in washing up water and remove
any food debris. Wipe again with a damp dishcloth, this
time soaked in clean water and dry thoroughly with paper
kitchen towel.
5. The bowl, inner cover and blade assembly are suitable to be
cleaned in a dishwasher or washed in hot water with a little
washing up liquid. Rinse and wipe dry.
6. Following use and cleaning, the motor housing and
bowl/blade assembly should be stored separately from
each other (i.e. without the motor housing on the bowl) to
allow any odours from the previous food to dissipate.