Installation Instructions

© 2017-2018 TurboChef Technologies, Inc.
CT-104648 / Rev G / March 2018
Page 3 of 4
COOKTEK BY TURBOCHEF
Incogneeto™ Installation Instructions
Measure the countertop thickness where the unit will be installed (Figure 1). e top of the unit must be 38 to 42 mm
(1.5” to 1.65") from the top of the counter.
¾” (20 mm) Stone Countertop
Mounting the Unit
e unit mounts in a square frame (supplied) underneath the counter. e frame is screwed into plywood, or narrow
plywood strips (1¼" (30 mm) countertop thickness only), which are glued onto the stone, or stone’s backing. No drilling
or cutting of the stone is required.
Figure 2: Incogneeto™ Unit Mounted to ¾” (20 mm) Countertop
with Plywood Sheet
1¼” (30 mm) Stone Countertop
Figure 3: Incogneeto™ Unit Mounted to 1¼” (30 mm) Countertop
with Plywood Sheet
Figure 4: Incogneeto™ Unit Mounted to 1¼” (30 mm) Countertop
with Two Plywood Strips
20 mm
40 mm
¾" (20 mm)
plywood sheet
Unit snaps into
lower holes
30 mm
42 mm
½" (12 mm)
plywood sheet
Unit snaps into
lower holes
30 mm
42 mm
½” (12 mm)
plywood strips
Unit snaps into
upper holes
Figure 1: Measuring the Countertop Thickness
NOTE: ¾" (20 mm) countertops must be installed
with a plywood sheet.