Disassembly and Installation Note: The pictures are only for reference. 1.0pen the package. 2.Take out the TV. 3. Install the TV stands. connect the power cord. Accessories Koch: The pictures are only for reference.
Warning and Precaution Read al of the instructions before operating the set. Keep these instructions well fo later use. Important Safety Instructions © Read these instructions All the safety and operating Instructions should be read before this product ks operated. » Keep these instructions — The safety and operating instructions should be retained for future reference. ® Heed all warnings All wakings on the appliance and in the operating instructions should be adhered to.
Warning and Precaution specified by the manufacturer or have the same characteristics as the original one. © Attention should be drawn to environmental aspects of battery disposal. # Protective earthing terminal. The apparatus should be connected to a mains socket outlet ‘with a protective earthing connection. {Only for Class | appliance) «No naked flame sources, such as lighted candles, should be placed on the apparatus.
Warning and Precaution Positioning the TV ® Install Display on solid horizontal surface succotash table or desk. For ventilation, leave a space of at least 10cm free al around the set. To prevent any fat and unsafe situations, please do not place any objects on top of the set. This apparatus can be used in tropical and/or moderate climates. Fix the rear of enclosure to wall (only for some countries). Nate: The picture Is only for reference. © Naming: Never place a television set In an unstable: location.
Warning and Precaution Mode! Size Parameterize) Operating Environment © Do installation this equipment in a confined space such as a bookcase of similar unit » Do not use the set near damp, and cold areas, protect the set from overheating. ® Keep away from direct sunlight. Do not use the set near dust place.
Remote Control Function Note: 1). The pictures are for reference only, Fj. Some pistons may not be available for some regions ov some models. 3H you want bo return to the home page while using an application, please press BIT union to exit the application directly, the press HOME button to enter the home page. Buttons in applications may hae different functions, chichis confidant by the third parties haa i a oo BEE 8 Tum the standbys mode. 2. Mute (ik): Mute or restore the TV sound. 3.
LET EEL How to use E-Manual E-Manual bullet Into your TV and can be displayed on the screen. To meal more about your TV features, access your E-Manual by referring t the following. B E-manual T T Note:The pictures only for reference. 1. Press MENU button to access the main menu. 2. Press A/V button to select the sub menu “SETUP? 3, Press D> button to enter the “SETUP menu. 4. Press A/V button to select E Manual” 5. Press OK button to enter the E Manual? to check the Instructions of basic function. 6.
Terminals = ANTENNA IN Connect a coaxial cable to receive signal from the antenna, cable or satellite. ER Fm team aby == DIGITAL AUDIO OUT Use an optical able © output your TV ado signal to a compatible audio receiver. Nate: 1) The pictures are only for reference. 2) External equipment and cables shown herein are not supplied with the TV. 3) Some terminals may differ by different regions or models, and please take your actual TV set as the standard.
LCT TT Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions, = General Problem / Solution Ra mote control does not work Check the remote sensor on the remote control. Change the batteries. Batteries are not Installed correctly. .Man power Is not connected.
Waring voltage Dimensions (Wx Hx D) without stand Featherweight stand RF aerial Input Language of 05D System Channel coverage Hz 327720.7X420.7 X 34mm 40"; 893.6X516.2X86.3mm 75 ohm unbalanced Multiple options DTV: DB-C ATV: PARAMEDICAL BG/DI/I/NTSC-M 174 MHz 230 MHz 470 MHz 870 MHz DB-C: 50 MHz 858 MHz 950 MHz 2150 MHz ATV: 45.25 MHz 863.
