Instruction manual

FS-8707-11 Convia XML Manual Page 16 of 16
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: [phone] Fax: [phone] Toll Free: [phone] email: [e-mail]
Appendix A.3.2. Attributes
Attribute
Description
name
The name that is used to describe the device.
room
The zone path for the device in the hierarchy.
type
The device class. A list of device classes is presented in Appendix A.3.3
icon
The Icon name used for this device. The icon file can be retrieved from the gateway using
the following address. /MCE/Icons/<ICONNAME>
idnumber
The ID Number used to describe the device on the gateway. This number is used later on for
sending commands to the gateway.
onstatusname
The status name to be used when the device is on.
offstatusname
The status name to be used when the device is off.
brightstatusname
The status name to be used when the device was brightened.
dimstatusname
The status name to be used when the device was dimmed.
volume
The current volume or dim level setting.
coolsetpoint
The current cool setpoint used for both HVAC and HVACSingle.
heatsetpoint
The current heat setpoint used for only HVAC.
currenttemp
The current room temperature used for both HVAC and HVACSingle.
hvacmode
The current HVAC mode for HVAC only. A list of modes is presented in Appendix A.3.4
hvacfan
0 = fan is off and 1 = fan is on - available for HVAC only.
hvachold
0 = hold is off and any other value the hold is on - available for HVAC only.
indexnumber
The index number to refer to when controlling audio, events and cameras.
Appendix A.3.3. Device Class
Device Class
Description
Dimmable
This is a dimmable lighting device.
Switch
This device only supports on and off commands
Status
This device only reports the current status
HVAC
This device controls a full HVAC system.
HVACSingle
This device only controls a single setpoint HVAC system.
Camera
This device will show a video stream.
Remote
This device brings up a Custom Remote Page.
Audio
This device controls a distributed audio system.
Scene4
This device brings up a four button scene panel.
Event
This device brings up controls to control an event.
Unknown
Appendix A.3.4. HVAC Modes
Mode
Description
HEAT:
The device is in heat mode.
COOL:
The device is in AC mode.
AUTO:
The device will automatically switch between heat and AC.
OFF:
The device is turned off.