User`s guide

Chapter 1: Connections and Setup

Activating the

EMTA

After installing the EMTA and turn it on for the first time (and each time the modem is

reconnected to the power), it goes through several steps before it can be used. Each of these

steps is represented by a different pattern of flashing lights on the front of the modem.

Note: All indicators flash once before the initialization sequence.

If all of the lights are flashing sequentially, it means the EMTA is automatically updating its

system software. Please wait for the lights to stop flashing. You cannot use your modem during

this time. Do not remove the power supply or reset the EMTA during this process.