TX-NR535 AV RECEIVER Basic Manual Advanced Manual found here http://www.onkyo.com/manual/txnr535/adv/en.
Before Start Advanced Manual Advanced Manual is always updated with the latest information and its user friendly interface, which does not matter whether you access from PC or Smartphone, helps you to understand more deeply about the AV Receiver. Advanced Manual is consisted of the following chapters.
Step 1: Connections Personal computer TV HDMI OUT HDMI IN HDMI cable ¼ To use the ARC function, connect to the ARC compatible HDMI jack of the TV. HDMI OUT HDMI OUT HDMI OUT Blu-ray Disc/ DVD player HDMI OUT Game console Set-top box/Digital video recorder, etc. 1 Satellite/Cable set-top box, etc. ¼ Select an appropriate connection for your TV. www.onkyo.com/manual/txnr535/adv/en.html).
Step 1: Connections Connecting Components without HDMI The video/audio jacks other than HDMI jacks also have a preassigned input selector button on the front panel. See the name of the input selector button shown with the jack when connecting the device. It is possible to change the assignment if necessary. For more information, see the Advanced Manual (http://www.onkyo.com/manual/txnr535/adv/en.html).
Step 1: Connections 2 Front R Front L Connecting speakers Important: The power cord must be connected only after all other connections are completed. 12 3 Center Connection of each speaker: Correctly connect + and -. Using the colored labels for speaker cables will help correct connection. 6 45 12 3 45 6 Front speakers Center speaker Surround speakers Subwoofer ¼ Up to two subwoofers can be connected.
Step 1: Connections labels to the + side on the both ends of each channel's cable will help correct connection. The subwoofer jack supports connection of a subwoofer with built-in power amplifier. Set the cut-off filter selection switch of the subwoofer to DIRECT. If the subwoofer does not have a cut-off filter selection switch but has a cut-off frequency adjusting dial, turn it to the maximum frequency.
Step 2: Setting Up 1 Turning the power on Connect the power cord to the outlet (¼). Press zON/ STANDBY on the main unit or zRECEIVER on the remote controller to turn the unit on or to standby mode. r When the unit is turned on, a large instantaneous current may flow affecting functionality of the computer and other devices. It is recommended to use a separate outlet from that for the computer or such other sensitive devices. ¼ Taiwanese model includes a removable power cord.
Step 2: Setting Up 5. When the measurement is completed, the measurement result is displayed. 3 3. Select and set the authentication method. Making Wi-Fi setting Wi-Fi Setup AccuEQ Room Calibration <-Review Speaker Configuration-> Subwoofer Front Center Surround Crossover : : : : : Yes Small Small Small 150 Hz Save Cancel Press d/c on the remote controller to check the settings. Pressing ENTER when "Save" is selected will save the settings.
Step 2: Setting Up PIN code: Select this method when the automatic setting button of the access point is beyond the reach. Select "PIN code" with the cursor buttons and press ENTER to display the 8-digit PIN code. Register the displayed PIN code to the access point, select "OK" with the cursor buttons and press ENTER. For how to register the PIN code to the access point, refer to its instruction manual. 4. Establish connection.
Step 3: Playing Back 1 Playing the player and TV Press RCV on the remote controller and press 1 zRECEIVER to turn the power on. r Switch the input on the TV to that assigned to the unit. Use the TV's remote controller. 2. Select the desired listening mode. Press the 5 listening mode buttons to switch the mode so that you can enjoy different listening modes. For details about the listening modes, see "Listening modes" on the next page. 3. Adjust the volume with 9. mode.
Step 3: Playing Back Listening modes Select the desired mode by switching and listening actual sound in different modes. The selectable listening modes depend on the format of the input signals. MOVIE/TV: You can select a listening mode suitable for movies and TV programs. MUSIC: You can select a listening mode suitable for music. GAME: You can select a listening mode suitable for games. Changing the Display Brightness: Press DIMMER on the remote controller several times to select the desired brightness.
Step 3: Playing Back Pairing 4 Using the Home menu Pairing is necessary when using the Bluetooth-enabled device for the first time. Before starting the procedure, learn how to enable the Bluetooth setting function and to connect with other devices on the Bluetooth-enabled device. In the Home menu, you can make advanced settings and use Internet radio and DLNA. 1. Press BLUETOOTH on the remote controller. 1.
Step 3: Playing Back Bass, Treble: Adjust volume of the front speaker. r It cannot be set if the listening mode is Pure Audio (European, Australian and Asian models) or Direct. PM Bass (Phase Matching Bass): Suppress phase shift in the midrange to enhance bass sound. Thus smooth and powerful bass sound can be obtained. r It cannot be set if the listening mode is Pure Audio (European, Australian and Asian models) or Direct.
Parts Name 1 2 3 4 56 7 8 9 N G H I J K L (European, Australian and Asian models) (European, Australian and Asian models) M F O P Q R S T Front Panel 1 zON/STANDBY button: Turns the unit on or into 2 3 4 5 6 7 8 9 standby mode. BLUETOOTH indicator: Flashes while pairing with a Bluetooth-enabled device is in progress and stays lit when pairing is completed. ZONE 2 button: Controls the ZONE function. Wi-Fi indicator: Lights when the unit is connected to the wireless LAN router.
Parts Name 1 2 3 4 6 5 7 1 23 4 5 9 6 7 8 Display 1 Lights in the following conditions. "Z2": ZONE 2 output (Taiwanese model) 8 9 F G H is on. / "HDMI": HDMI signals are input and HDMI input selector is selected. / "ARC": Audio signals are input from ARC compatible TV and TV/CD input selector is selected. / "3D": Input signals are 3D. / "USB" (¼): "USB" input is selected and USB storage device is connected. / "NET" (¼): "NET" input is selected and the unit is connected to the network.
Troubleshooting The AV receiver turns off unexpectedly. r The AV receiver will automatically enter standby mode when Auto Standby is set and launched. There’s no sound, or it’s very quiet. r A wrong input selector button has been selected. Select a correct input for the player. Also check that muting is not on. r Not all listening modes use all speakers. There’s no picture. r A wrong input selector button has been selected. r There will be no video output, if the listening mode is Pure Audio.
Specifications Amplifier Section Rated Output Power All channels: 65 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.7% (FTC) 90 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 0.
License and Trademark Information InstaPrevue and the InstaPrevue logo are trademarks or registered trademarks of Silicon Image, Inc. in the United States and other countries. Precautions Apple, iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com.
– 0KPKGLU\[O 1PM[Q %QTRQTCVKQP FGMNCTWLG ŏG 6: 04 LGUV \IQFP[ \ \CUCFPKE\[OK Y[OCICPKCOK K KPP[OK YĜCıEKY[OK RQUVCPQYKGPKCOK Dyrektywy 1999/5/EC. – Eu, Onkyo Corporation, declaro que o TX-NR535 cumpre os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC. – 2TKP RTG\GPVC 1PM[Q %QTRQTCVKQP FGENCTà Eà CRCTCVWN 6: 04 GUVG ÊP EQPHQTOKVCVG EW EGTKPķGNG GUGPķKCNG ĵK EW CNVG RTGXGFGTK RGTVKPGPVG CNG Directivei 1999/5/CE.
Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN http://www.onkyo.com/ The Americas 18 Park Way, Upper Saddle River, N.J. 07458, U.S.A. For Dealer, Service, Order and all other Business Inquiries: Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/ For Product Support Team Only: 1-800-229-1687 Europe Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY Tel: +49-8142-4401-0 Fax: +49-8142-4208-213 http://www.eu.onkyo.
Support for Spotify Connect Spotify Connect can be supported by updating the unit's firmware. Simply click the Connect icon and select the unit on the playback screen of Spotify application to enjoy high quality music streaming. To enable Spotify Connect, install the Spotify application on your smartphone or tablet first. Then, create a Spotify premium account. The Spotify software is subject to third party licenses found here: ¼ www.spotify.
Unterstützung für Spotify Connect Spotify Connect kann durch Aktualisierung der Firmware des Geräts unterstützt werden. Klicken Sie einfach auf das Symbol Connect und wählen Sie das Gerät auf dem Wiedergabe-Bildschirm der Anwendung Spotify, um hochqualitatives Musik-Streaming zu genießen. Zur Aktivierung von Spotify Connect, installieren Sie die Anwendung Spotify zuerst auf Ihrem Smartphone oder Tablet. Erstellen Sie dann einen Spotify Premium-Account.
