User manual

VTrak 15200 User Manual
58
Logical Drive Auto Creation Information:
Name: LogicalDrive
Number of Physical Drives: 6
RAID mode: RAID 50
Stripe block size: 64KB
SMART check: enabled
Initialization: full
Create Logical Drive now(y/n)?>y
3. If you agree with the specifications, press Y and Enter.
If you disagree, press N and Enter. Then select Create New Logical Drive
(below) and input your own settings.
In order to use this logical drive to read and write data, you must partition
and format it using the Host PC’s operating system.
Create a Logical Drive Manually
Use this feature to manually build a logical drive to meet your own requirements
or to use less than the full number of available disk drives. See Chapter 7 for a
discussion of RAID Levels, the number of drives each supports and an
explanation of the available options.
1. Press 2 and Enter to access the Create New Logical Drive feature.
**************Define New Logical Drive**************
Total 3 Physical Drives
*******Physical Drives Selection*******
Id Name Size
----------------------------------------
3 Maxtor 6Y080M0 81 GB
4 Maxtor 6Y080M0 81 GB
5 Maxtor 6Y080M0 81 GB
Enter Physical Drive ids and/or id ranges
separated by commas. For example: 1,5,8-15.
Press R to continue after you have finished
selecting Physical Drives.
Your input?>3-5
2. Choose the physical drives for your logical drive and press Enter.
*******Physical Drives Selection*******
Id Name Size
----------------------------------------
*3 Maxtor 6Y080M0 81 GB