User manual

VTrak 15200 User Manual
178
• Click on the firmware image file to select it.
Example: VTrak-01.02.000.54.img
• Select Y-modem protocol
•Click Send
The file transfer takes about 20 minutes. When complete, the BSP> prompt
will reappear.
10. At BSP> type ptiflash -b 0x01008000.
Double-check your entry. Then press Enter.
This command validates the firmware upgrade file then writes the binary
image to VTrak’s flash ROM. These actions take about 8 minutes. When
complete, the BSP> prompt will reappear.
11. Type reset and press Enter to restart the VTrak.
This completes the firmware update operation.