User manual

VTrak 15200 User Manual
174
Firmware Update – Network
This is the preferred firmware update method for most applications. This
procedure takes about ten minutes. An alternative method based on a serial port
is listed on page 177.
Use the CLU to update VTrak’s firmware. In order for the firmware update to
work, three things are required:
• A TFTP server
• A firmware image file
• Proper IP address settings in the CLU
The use of a TFTP server enables automation of the firmware update process.
TFTP Server
1. Obtain and install TFTP Server software onto a PC or Server on your
network.
2. Download the latest firmware update file from the Promise website:
www.promise.com.
Default Directory IP Address of TFTP Server