User manual

Chapter 5: Management with the CLU
143
ID Name Read Count Read TRANS Write Count Write TRANS
-----------------------------------------------------------------------------------------------------
1 ST3160023AS 524434 2516 Mb 1048576 1066 Mb
2 WDC WD1200JD 625306 3146 Mb 3497525 2443 Mb
3 Maxtor 6Y080M0 321986 1743 Mb 2752876 1395 Mb
--------------------------------------------------------------------------------------------------
Press Enter key to return
Read and Write Counts record the number of input/output transactions.
Read and Write Transactions record the volume of data in Megabytes.
2. Press Enter to return to the Physical Drive Management menu.
Logical Drive Management
From the Main Menu, press 3 and Enter to access Logical Drive Management.
This are deals with logical drive that you create, in contrast to physical drives
which are covered under a separate menu.
PD: physical drive, LD: logical drive
SBS: stripe block size, CAP: capacity, SYNC: synchronization
INIT: initialization, RBLD: rebuild, RC: redundancy check
MP: media patrol, PDM: predictive data migration
PDM Auto Start option: Disabled
ID Name RAID SBS CAP Member PDs Status
----------------------------------------------------------------------------------
1 LogDrv1 5 64K 239GB 1-2,4 Functional
2 LogDrv2 1E 64K 265GB 3,5,7 SYNC 50%
----------------------------------------------------------------------------------
Logical Drive Management
1. Logical Drive Auto Creation
2. Create New Logical Drive
3. Delete Logical Drive
4. Modify Logical Drive Parameters
5. PDM Auto Start Option
R. Return to Previous Menu
Please enter your menu choice>
The Logical Drive Magement submenu lists all logical drives in the order of their
creation, along with name, RAID level, Stripe Block Size, Capacity, physical
drives used and its status.
Status is reported for each logical drive as follows:
• Functional – Normal operation