User manual

Chapter 2: Installation

• Unpack the VTrak storage subsystem (below)

• Mount VTrak 15200 in a rack (page 8)

• Install disk drives (page 9)

• Set Up Network Connections (page 15)

• Set Up Serial Connections (page 17)

• Connect the Power (page 18)

• Set IP Address with the CLU (page 20)

• Set up Telnet Connection (page 23)

• Install WebPAM PRO (page 25)

Unpack the VTrak

The VTrak box contains the following items:

• VTrak 15200 Unit • (64) Screws for disk drives (4 spares)

• Quick Start Guide • (2) 1.5m (4.9 ft) Power cords

• Null Modem Cable • CD with WebPAM Software, User

Manual and Quick Start Guide

• Left and right mounting rails

Warning

The electronic components within the VTrak disk array are

sensitive to damage from Electro-Static Discharge (ESD).

Observe appropriate precautions at all times when handling the

VTrak or its subassemblies.

Important

Use the following categories of network cables for the iSCSI

connections on VTrak:

• Cat 6, preferred

• Cat 5E, minimum