User manual

Chapter 5: Management with the CLU
129
The Parameters and Submenu appear with the new Hot Spare setting.
--------------------------------------------------------------------------------
Logical Drive 2 Parameters:
Name: LogDrv2 RAID Level: 1
Stripe Block Size 64K Capacity: 35 GB
Member PDs: 3,5 Smart Check: On
Cache Policy: Write Through Retry Count: 2
Auto Rebuilding: On Hot Spare: Dedicated(6)
Priority: High(RBLD), High(SYNC), High(Migration)
SCSI Mapping: CH 1 LUN 1
SCSI Mapping: CH 2 LUN 1
--------------------------------------------------------------------------------------
Modify Logical Drive 2 Parameters
1. SCSI Assignment
2. Cache Policy
3. Retry Count
4. Enable/Disable SMART
5. Name
6. Priority
7. Hot Spare Policy
8. Auto Rebuilding
R. Return to Previous Menu
Please enter your menu choice>
This concludes the example.
CLU Index
A
Alias, iSCSI – Main Menu, 5 Enter, 1 Enter
Auto Rebuilding, Logical Drive – Main Menu, 3 Enter, 4 Enter
B
Back Plane Box – Main Menu, 1 Enter, 1 Enter, 4 Enter
Battery – Main Menu, 1 Enter, 2 Enter
Battery Board – Main Menu, 1 Enter, 1 Enter, 4 Enter
BIDI CHAP Authentication, iSCSI – Main Menu, 5 Enter, 1 Enter
Boards, VTrak – Main Menu, 1 Enter, 1 Enter, 4 Enter
Boot Sector, Wipe – Main Menu, 2 Enter
Burst Length, iSCSI – Main Menu, 5 Enter, 1 Enter
Buzzer/Beeper – Main Menu