Specifications

3-15
Cisco ONS 15200 Maintenance Manager Installation and Operations Guide
78-13764-01
Chapter 3 CLIP Module Configuration
Clip Status
Figure 3-8 CLIP module RX and TX points
3.3.2 Client Side
The Client Side area of the Clip Status screen describes how the CLIP module is operating in relation to
the client equipment attached to the ONS 15200 system. Values for Client RX Power and Laser Bias are
listed on this screen. Table 3-11 describes the client access parameters.
3.3.3 Board
The Board area of the Clip Status screen provides the Board Temperature and Power parameters for the
CLIP module. Table 3-12 describes the Board parameters.
Client TXClient RX
DWDM B RX
DWDM TX
DWDM A RX
LEGEND
DWDM - dense wavelength
division multiplexing
RX - receive
TX - transmit
54590
Table 3-11 Clip Status - Client Side
Parameter Definition
RX Power Displays the strength of the signal received from the
client equipment attached to the ONS 15200 network.
Laserbias Displays the laser bias current for the selected CLIP
module.