Specifications

3-7
Cisco ONS 15200 Maintenance Manager Installation and Operations Guide
78-13764-01
Chapter 3 CLIP Module Configuration
Clip Summary
Figure 3-4 Set Value (datarate) window
3.2.3 DWDM Side
The DWDM Side area of the Clip Summary screen describes parameters that apply to the ONS 15200
transmissions between CLIP modules. The values for the Switch Mode field can be changed by the
operator. Table 3-7 describes the DWDM Side parameters.
Ta b l e 3 - 6 D a t a R a t e Va l u e s
Parameter Value
OC-3 The selected CLIP module will transmit at a bit rate of 155 Mbps.
STM-1 The selected CLIP module will transmit at a bit rate of 155 Mbps.
OC-12 The selected CLIP module will transmit at a bit rate of 622 Mbps.
STM-4 The selected CLIP module will transmit at a bit rate of 622 Mbps.
OC-48 The selected CLIP module will transmit at a bit rate of 2.5 Gbps.
STM-16 The selected CLIP module will transmit at a bit rate of 2.5 Gbps.
gbit_eth The selected CLIP module will transmit data at a gigabit ethernet rate
(approximately 1.25 Gbps).
pass_through The selected CLIP module will allow data to pass through regardless of data
rate (available only for 2R/3R CLIP modules).