Specifications

3-3
Cisco ONS 15200 Maintenance Manager Installation and Operations Guide
78-13764-01
Chapter 3 CLIP Module Configuration
Clip Summary
3.1.4 Tx Transponder
The Tx Transponder area of the Clip Inventory screen displays inventory information about the Tx
transponder submodule on the CLIP module (Figure 3-1). See Table 3-4 for Tx Transponder parameters.
3.2 Clip Summary
The Clip Summary screen displays the configuration of the selected CLIP module (Figure 3-2). The Clip
Summary screen is divided into three areas: General, DWDM Side, and Client Side.
The information available on the Summary screen varies, depending on whether the Summary screen is
associated with a CLIP module configured as protected or unprotected. Figure 3-2 shows the Summary
screen for a protected CLIP. The Summary screen for unprotected clip modules does not show the Switch
Mode or Standby Path fields.
Table 3-3 Clip Inventory Screen - Rx Transponder
Parameter Definition
RxTP Type Displays the type of Rx transponder installed on the selected CLIP
module. The Type definition is divided into these parts:
• Client laser nominal optical power
• Level of signal regeneration (3R, 2R/3R)
• APD (only option available)
• Protected or unprotected
RxTP Production No Displays the Cisco part number of the Rx transponder module
installed on the selected CLIP module.
RxTP Serial No Displays the serial number of the Rx transponder module installed
on the selected CLIP module.
Table 3-4 Clip Inventory Screen - Tx Transponder
Parameter Definition
TxTP Type Displays the type of Tx transponder installed on the selected CLIP module.
The TxTP Type definition has these parts:
• Transmitted optical power
• Level of signal regeneration (3R, 2R/3R)
• Protected or unprotected
TxTP Production No Displays the Cisco part number of the Tx transponder module installed on the
selected CLIP module.
TxTP Revision No Displays the revision of the Tx transponder module installed on the selected
CLIP module.
TxTP Serial No Displays the Cisco serial number of the Tx transponder module installed on
the selected CLIP module.