Specifications

2-5
Cisco ONS 15200 Maintenance Manager Installation and Operations Guide
78-13764-01
Chapter 2 Software Description
User Interface
2.2.3 CLIP Folders
The CLIP folders provide access to each CLIP module installed in the system. There are several ways
to access the CLIP folder, but each provides the same categories of information. CLIP folders are located
in the following folders:
• Path
• MCU
• SCU
• Unit
The CLIP folder is identified by the serial number of the CLIP module and the ITU channel where it is
assigned (default) or any name assigned to that CLIP module by a operator user through the Command
Line Interface. Refer to the Cisco ONS 15200 Command Line Interface Manual for information on
assigning a name to a CLIP module.
Each CLIP folder contains the following screens:
• CLIP Inventory
• CLIP Summary
• CLIP Status
• CLIP Alarms
• CLIP Event Log
2.2.4 Clip Inventory Screen
The Clip Inventory screen gives general system information, as well as information regarding the board,
receive transponder, and transmit transponder (Figure 2-4).