Specifications

1-8
Cisco ONS 15200 Maintenance Manager Installation and Operations Guide
78-13764-01
Chapter 1 Installation
Uninstalling Maintenance Manager
Figure 1-8 SCU Maintenance Manager connection
Step 3
Using the DB-9 connector, connect the end of the DRV CAN cable to the DB-9 connector at the end of
the CAN cable. The CAN cable is the black cable with the large cylindrical component in the middle.
Step 4 Connect the DRV CAN cable to the computer. The CAN cable connects to the PCMCIA connector on
the CAN board. Figure 1-7 illustrates the completed connection.
Step 5 When the two cables are connected from the laptop to the MA port, open the Maintenance Manager. The
Maintenance Manager main window opens.
1.4 Uninstalling Maintenance Manager
The following procedure describes how to uninstall the Maintenance Manager application.
Procedure: Uninstall Maintenance Manager
Step 1 From the Windows Start menu, click Settings > Add/Remove Programs.
Step 2 Choose ONS 15200 Maintenance Manager Operator from the list.
Step 3 Click OK.
1.5 Upgrading Maintenance Manager
To upgrade Maintenance Manager to a more recent version, you must first uninstall the older version
and then install the newer version. Follow the procedure in the “Uninstalling Maintenance Manager”
section and then follow the procedure in the “Installing the Maintenance Manager Software” section on
page 1-2.
1.6 Opening Maintenance Manager
The following procedure describes how to open the Maintenance Manager application.
Maintenance
Manager Connection
54819