Specifications
MicroGram Computers
Phone: (02) 4389 8444 Date: 26/07/05
Fax: (02) 4389 8388 Price List
Page: 42
Cat No Description RRP
Ex GST Inc GST
Interface Cards - Hard Drive Controllers
90.00
2886-12 HDD Cont PCI IDE RAID Ultra DMA 133 Std 99.00
This combined standard and RAID controller has dual Ultra DMA133 IDE channels designed to provide
data security and performance. It supports RAID 0, 1 and 10 and is suitable for use with Windows 95/98,
NT, 2000 & XP. Includes Std and Low Profile back plane brackets.
544.55
2708-12 HDD Cont PCI SCSI Adaptec MIO-29160 Ult 599.00
Single channel card. Connects SCSI hard drives and other SCSI hard drives, internally and externally.
64-bit PCI (32-bit compatible). One 68pin internal connection for LVD SCSI , one 68pin for Ultra Wide
SCSI and one 50pin for Ultra SCSI. Will handle up to 15 devices. Windows NT 4.0, 95, 98, 2000.
adaptec EZ-SCSI software and supported operating system drivers.
390.00
2694-12 HDD Cont PCI SCSI Ultra2 DUAL 429.00
A high performance PCI Dual Ultra2 SCSI-3 adapter with data transfer rate up to 80 MB/s It features
PCI Bus support for both 32 and 64 Bit.
135.45
2584-12 HDD Cont PCI SCSI-II FAST 149.00
A SCSI-II FAST PCI controller with a data transfer rate of 10 Mb/s. It is fully PCI DMA Bus Master and
Plug & Play compliant and will connect up to 7 SCSI devices. SYMBIOS SDMS (SCSI Device
Management System) software is bundled with the card. It supports DOS and Windows, Windows 95,
Windows NT, SCO Unix, Interactive UNIX, NeXTSTEP, UnixWare, Novell Netware, OS/2 etc.
It has an external HD50 female socket in addition to the internal IDC50 male header.
108.18
2586-12 HDD Cont PCI SCSI-II Ultra FAST-20 119.00
A SCSI-II Ultra FAST-20 PCI controller with a data transfer rate of 20 MB/s. HD 50 on back plane
708.18
2874-12 HDD Controller IDE Raid & Hot Swap Fram 779.00
The RAID frame includes the controller and two removable frames which accept two IDE drives. The
controller provides RAID Level 1 (disk mirroring) and supports hot swappable drives and auto-rebuild
in the event a new drive is installed, without user intervention. (Can also be used as an on-line hard
drive copier) The frame fits into two 5.25" bays. EIDE, ATA-100, Ultra DMA 66/33 or PIO 4 hard
drives are supported. The complete assembly is operating system independant and appears as a
standard IDE drive to the hdd controller.
Interface Cards - Miscellaneous Cards
71.82
2014-12 XBOX Wireless Controller 79.00
Powered by the latest 2.4GHz Frequency Hopping technology, this controller has been designed with
every feature that a gamer would demand. Equipped with pressure-sensitive buttons, gamers will be able
to enjoy accurate & responsive game movements with every single touch. In addition, the built-in
vibration feedback motors stimulate real-life crashes and explosions, bringing the gaming sensation
closer to you.
Interface Cards - Parallel Cards
362.73
2337-12 1 Port EPP Parallel DB25 PCMCIA 399.00
High speed parallel adapter conforming to IEEE 1284 EPP standards with a DB-25 connector. Certified
for Windows 95/98/2000/NT/XP. Support for HP palmtops upon request. Low power consumption to
maximise battery life.
10.00
2923-12 Converter 12V IDE to 2 x Serial ATA 11.00
Converts the common IDE power connector to the new Serial ATA type. (Same Voltage)
9.05
2899-12 Converter 12V IDE to Serial ATA 9.95
Converts the common IDE power connector to the new Serial ATA type. (Same Voltage)
71.82
2891-12 Converter IDE Drive to Serial ATA - Hor 79.00
Plugs directly into a standard IDE hard drive to provide a serial ATA interface. This model protrudes
approx 40mm directly out from the back of the drive in a horizontal plane. (does not obscure the rear of
the drive).
Supports UDMA transfer rates of 66,100,133 and 150Mbps. (33Mbps is not supported). Suitable for use
with ATAPI devices, CD ROMs, CD-R/RW etc.
Includes one SATA cable and power adapter cable. No software necessary (OS support is provided by
the SATA motherboard interface).
71.82
2892-12 Converter IDE Drive to Serial ATA - Ver 79.00
Plugs directly into a standard IDE hard drive to provide a serial ATA interface. This model plugs into
the IDE connector and extends the length of the drive by the thickness of the PCB and the SATA
connector. The PCB is in the vertical plane. A cutout in the PCB provides access to the drive power
connector and jumpers of most current drives.
Supports UDMA transfer rates of 66,100,133 and 150Mbps. (33Mbps is not supported). Suitable for use
with ATAPI devices, CD ROMs, CD-R/RW etc.
Includes one SATA cable and power adapter cable. No software necessary (OS support is provided by
the SATA motherboard interface).
53.64
2893-12 Converter Mother Board IDE to Serial AT 59.00
This converter provides two serial ATA connectors from an IDE motherboard connector. Jumpers are
provided to select master - Slave. It protrudes vertically from the motherboard.
Supports UDMA transfer rates of 66,100,133 and 150Mbps. (33Mbps is not supported).
Includes one power adapter cable. Supported by Windows 98/ME/NT4.0/4000/XP
FreeFax 1 800 625 777 http://www.mgram.com.au
Vamtest Pty Ltd Trading as MicroGram Computers ABN 60 003 062 100