Specifications
MicroGram Computers
Phone: (02) 4389 8444 Date: 26/07/05
Fax: (02) 4389 8388 Price List
Page: 26
Cat No Description RRP
Ex GST Inc GST
Data Logging & Control - DI & Relay O/P
244.55
17066-12 16 CH Opto DI 16 CH Relay Dec ISA 269.00
Features 16 opto isolated digital input channels with a max 45 Volt DC input range. The input signal
can be completely floated to prevent ground loops. 16 reed relays are also included on the card and
have a contact rating of 150V DC, 1A and a life expectancy of 100 million operations at signal level
load. Suitable for use with Windows 95/98/NT.
520.91
ACL7225-12 16 CH Opto DI 16 CH Relay ISA 573.00
The ACL-7225 provides 16 electro-mechanical relays for output actuation and 16 isolated digital inputs.
It can plug directly into an ISA slot. Each relay is matched with one red LED to reflect its ON/OFF
status. Each input channel is jumper selectable to either AC or DC input control voltage. The isolation
voltage is guaranteed at 1,000V, so that common-mode voltages and voltage spikes are safely isolated
from the PC and the ACL-7225. The digital I/O is via two 37-pin D-type connectors.
453.64
17092-12 16 CH Photo Relay PCI Dec 499.00
299.09
17075-12 4 CH Opto DI 4 CH Relay Output PCI Dec 329.00
A PCI interface card that features 4 opto isolated digital input channels with an operation level of 17 -
28 volt DC or TTL input range. 4 reed relays (changeover, ie NC and NO) are also included on the card
and have a contact rating of 120V AC 1A, with an isolation resistance of 100M Ohm. All connections
are via a DB25F on the backplane. Life expectancy is 100 million operations at signal level load.
217.27
17067-12 8 CH Opto DI 8 CH Reed Relay Dec ISA 239.00
Features 8 opto isolated digital input channels with an input voltage range of 17Volt to 28 Volt or TTL
level. The input signal can be completely floated to prevent ground loops. 8 reed relays are also
included on the card and have a contact rating of 120V AC/DC, 1A and a life expectancy of 100 million
operations at signal level load. Suitable for use with Windows 95/98/NT.
335.45
17069-12 8 CH Opto DI 8 CH Relay Output Daughter 369.00
A daughter board that features 8 opto isolated digital input channels with 5 - 24 volt AC or DC, with
don't care polarity input range, and a withstand voltage of 1000V. 8 reed relays are also included on the
card and have a contact rating of 120V AC 0.5A or 30VDC 1A, breakdown voltage is 300V AC/DC min.
LEDs indicate energised relays. It is an expansion daughter board for Cat No 17068.
362.73
17074-12 8 CH Opto DI 8 CH Relay Output PCI Dec 399.00
A PCI interface card that features 8 opto isolated digital input channels with an operation level of 17 -
28 volt DC or TTL input range. 8 reed relays (changeover, ie NC and NO) are also included on the card
and have a contact rating of 120V AC 1A, with an isolation resistance of 100M Ohm. All connections
are via a DB37F on the backplane. Life expectancy is 100 million operations at signal level load.
Available in either 4 or 8 port, this device allows your computer to either control external devices or
receive input.
This might be information from PIR sensors, pressure mats or
even the simple window sensors. Similarly these cards could be used to control gate/door locks, camera
servos, or even major industrial or domestic appliance via relays, etc.
362.73
17003-12 8 Ch Opto Input 8 Ch Reed Relay Board 399.00
Provides eight opto isolated digital inputs, 1500V isolation, and eight reed, SPDT relay outputs. It
interfaces to a PC via Cat.No 17002 or 17054.
180.91
17035-12 Parallel Port 8 Opto 8 Reed Relay Termi 199.00
An external addon card that plugs into the parallel port module 17034 and provides eight opto isolated
inputs with a nominal max input voltage of 15 Volts and eight reed relay outputs with a contact rating of
120V AC/DC 1 Amp.
Data Logging & Control - Digital I/O
253.64
17005-12 16 Channel Opto Input Board 279.00
The 16 channel isolator input board provides 16 opto-isolated digital input channels, which allow the
input signals to be completely floated and prevent the ground loop. Features include internal & external
power selectable, input signals are buffered with voltage comparators, input threshold voltage
adjustable and breakdown voltage of 1500VDC. Includes 26-pin flat cable. It interfaces to a PC via the
cat no. 17002(ISA) or 17054(PCI).
317.27
AX5214-12 48 Bit Dig I/O optional SSR ISA 349.00
The AX5214 is a 48-bit digital I/O board that can be used with TTL low-level I/O circuitry or with solid
state relay module (8, 16 or 24 channel versions) providing 2500V isolation for interfacing with high
level AC and DC signals. The 48 DIO lines are arranged into two separated groups. Each group,
emulates 8255 programmable peripheral interface chip mode 0 but with stronger driver capability, is
further divided into three 8-bit ports (Port A,B & C). These ports can be functionally programmed as
either digital inputs or outputs. A unique feature is interrupt on change of state which frees up the PC
since there is no need to poll the digital input port for an event to occur.
590.00
AX5215-12 96 Bit Dig I/O Optional SSR ISA 649.00
The AX5215 is a 96 channels (bits) digital input and output board that can be used with TTL low-level
I/O circuitry or with AX754, AX755, AX756 and AX1416/24 providing isolation for interfacing with high
level I/O signals. This board has an interrupt on change of state. Interrupt generation occurs when one
of the 8 digital input channels changes state in a single port.
FreeFax 1 800 625 777 http://www.mgram.com.au
Vamtest Pty Ltd Trading as MicroGram Computers ABN 60 003 062 100