Specifications

Connecting into Option 1 - Using VGA Input
Monitor
By using a standard VGA 15 pin computer cable plug and play or,
alternatively you may cut the end of your cable and wire directly to the
output connector of the source equipment.
Pin 1 Analog red input.
Pin 2 Analog green input.
Pin 3 Analog blue input.
Pin 4 Ground.
Pin 5 Digital ground.
Pin 6 Analog red ground.
Pin 7 Analog green ground.
Pin 8 Analog blue ground.
Pin 9 Ground.
Pin 10 Sync ground.
Pin 11 Ground.
Pin 12 SDA (DDC Data).
Pin 13 H. Sync or H + V Sync.
Pin 14 V. sync.
Pin 15 SCL (DDC CLK).
Option 2 - RGB wiring via Adapter PCB
The PCB interface board is designed to facilitate connection from older style
CGA/EGA/VGA source equipment. The board also allows for adjustment of
incoming colour signal levels and Impedance Matching selection selection for
'black line' screen..
Using the supplied 5 and 6 wire open ended cables, signal formats of RGBH+V
(combined sync) or RGBHV (separate sync) may be easily connected.